Z68A-GD80 (B3) series MS-7672 (v3.
Preface Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
MS-7672 Safety Instructions Always read the safety instructions carefully. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. ￭ Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.
Preface FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MS-7672 WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that... DEUTSCH Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.
Preface ESPAÑOL MSI como empresa comprometida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida
MS-7672 TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: ČESKY Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13.
Preface ▍ Contents Copyright Notice �������������������������������������������������������������������������������������������� ii Trademarks ���������������������������������������������������������������������������������������������������� ii Revision History �������������������������������������������������������������������������������������������� ii Technical Support ����������������������������������������������������������������������������������������� ii Safety Instructions ��������������������
MS-7672 Appendix A Realtek Audio �������������������������������������������������������������������������� A-1 Installing the Realtek HD Audio Driver �����������������������������������������������������������������A-2 Software Configuration �����������������������������������������������������������������������������������������A-3 Appendix B Intel RAID �������������������������������������������������������������������������������� B-1 Introduction ������������������������������������������������������
Chapter 1 Getting Started Thank you for choosing the Z68A-GD80 (B3) Series (MS7672 v3.X) ATX mainboard. The Series mainboards are based on Intel® Z68 chipset for optimal system efficiency. Designed to fit the advanced Intel® LGA1155 processor, the Series mainboards deliver a high performance and professional desktop platform solution.
Getting Started Mainboard Specifications Processor Support ■ Intel® CoreTM i7/ CoreTM i5 /CoreTM i3/ Pentium®/ Celeron® processor in the LGA1155 package (For the latest information about CPU, please visit http://www.msi.com/service/cpu-support) Chipset ■ Intel® Z68 (B3) chipset Memory Support ■ 4 DDR3 DIMMs support DDR3 2133*(OC)/ 1600*(OC)/ 1333/ 1066 DRAM (32GB Max) ■ Supports Dual-Channel mode (*For more information on compatible components, please visit http://www.msi.
MS-7672 Connectors & Buttons Chapter 1 ■ Back panel - 1 Optical S/PDIF-out port - 1 PS/2 keyboard/ mouse combo port - 1 Clear CMOS button - 1 IEEE 1394 port - 4 USB 2.0 ports - 2 USB 3.0 ports - 1 eSATA port - 2 LAN ports - 1 DVI-I port ** - 1 HDMI port ** - 6 flexible audio ports **(The HDMI and DVI-I ports only work with Integrated Graphics Processor) ■ On-Board - 3 USB 2.0 connectors - 1 USB 3.
Getting Started Mainboard Layout JPWR2 CPUFAN1 Top : Optical S/PDIF out Bottom:mouse/ keyboard Clear CMOS button LANCihp Top: 1394 port Middle : USB 2.0 ports Bottom: e-SATA port Top: LAN Jack Bottom: USB 2.0 ports SYSFAN3 Top: LAN Jack Bottom: USB 3.0 ports Top: DVI-I port Bottom: HDMI port Intel Z68 PCI1 JBAT1 PCI _E4 PCI2 Audio codec SATA7 1394 Cihp USB 3.
MS-7672 Packing Contents Driver / Utility DVD User Guide Back IO Shield SATA Cable Optional Accessories USB 2.0 Bracket USB 3.0 Bracket S/PDIF Out Bracket eSATA Bracket V-Check Cable M-Connector USB3 to USB2 Connector SATA Power Cable CrossFire Cable SLI Cable eSATA Power Cable * These pictures are for reference only and may vary without notice. * The packing contents may vary according to the model you purchased. * If you need to purchase the optional accessories, please visit http://www.
Chapter 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While performing the installation, be careful in holding the components and following the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap before handling computer components. Static electricity may damage the components.
Hardware Setup Quick Components Guide JPWR3, p.2-10 JPWR2, p.2-10 CPU, p.2-4 SYSFAN1, p.2-14 DDR3, p.2-8 CPUFAN1, p.2-14 SYSFAN2, p.2-14 JPWR1, p.2-10 Back Panel, p.2-11 SYSFAN3, p.2-14 FV1, p.2-20 JBAT1, p.2-21 SYSFAN4, p.2-14 SATA, p.2-13 PCIE, p.2-23 PCI, p.2-23 JDLED3, p.2-14 JTPM1, p.2-18 JAUD1, p.2-19 JFP1/JFP2, p.2-15 JUSB1~3, p.2-16 JSP1, p.2-17 JCI1, p.2-17 J1394_1, p.2-19 JUSB4, p.2-15 RESET1/ POWER1/ TURBO1, p.
MS-7672 Screw Holes When you install the mainboard, you have to place the mainboard into the chassis in the correct direction. The locations of screws holes on the mainboard are shown as below. Chapter 2 The side has to toward the rear, the position for the I/O shield of the chassis. Screw holes Refer above picture to install standoffs in the appropriate locations on chassis and then screw through the mainboard screw holes into the standoffs.
Hardware Setup CPU (Central Processing Unit) When you are installing the CPU, make sure to install the cooler to prevent overheating. If you do not have the CPU cooler, consult your dealer before turning on the computer. For the latest information about CPU, please visit http://www.msi.com/service/cpu-support Important Overheating Overheating will seriously damage the CPU and system. Always make sure the cooling fan can work properly to protect the CPU from overheating.
MS-7672 CPU & Cooler Installation When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion. Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & mainboard. Chapter 2 1. The CPU socket has a plastic cap on it to protect the contact from damage.
Hardware Setup 5. Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with pure vertical motion and reinstall. 6. Engage the load lever while pressing down lightly onto the load plate. Alignment Key 7. Secure the lever near the hook end under the retention tab. 8. Make sure the four hooks are in proper position before you install the cooler. Important • Confirm if your CPU cooler is firmly installed before turning on your system.
MS-7672 10. Press the four hooks down to fasten the cooler. 11. Turn over the mainboard to confirm that the clip-ends are correctly inserted. 12. Finally, attach the CPU Fan cable to the CPU fan connector on the mainboard. Chapter 2 9. Align the holes on the mainboard with the heatsink. Push down the cooler until its four clips get wedged into the holes of the mainboard. Mainboard Hook Important • Read the CPU status in BIOS.
Hardware Setup Memory These DIMM slots are used for installing memory modules. For more information on compatible components, please visit http://www.msi.com/service/test-report DDR3 240-pin, 1.5V 48x2=96 pin 72x2=144 pin Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data with two data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system performance.
MS-7672 Installing Memory Modules 1. The memory module has only one notch on the center and will only fit in the right orientation. 3. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides. Notch Volt Important You can barely see the golden finger if the memory module is properly inserted in the DIMM slot. 2-9 Chapter 2 2. Insert the memory module vertically into the DIMM slot.
Hardware Setup Power Supply ATX 24-pin Power Connector: JPWR1 This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector. d n u ro V .G 5 V 4 2 3.+ +5 V d 2 2. 5 s n d 2 1.+ Re ou un d 2 0. Gr ro un # 2 9. G o N d 1 8. Gr -O un 1 7. PS o 1 6. Gr 2V V 1 5. 1 .3 1 4.- +3 1 3. 1 V .3 3 V .+ 2 V 2 1 2 1 .
MS-7672 Back Panel USB 2.0 Port IEEE 1394 Port LAN Optical S/PDIF-Out LAN DVI-I Port Line-In RS-Out Mic Keyboard/ Mouse eSATA Port USB 2.0 Port USB 3.0 Port SS-Out HDMI Port Clear CMOS button ▶ Optical S/PDIF-Out This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an optical fiber cable. ▶ Mouse/Keyboard The standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard.
Hardware Setup ▶ eSATA Port The eSATA (External SATA) port is for attaching the eSATA hard drive. ▶ LAN The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You can connect a network cable to it. Yellow LED Color LED State Condition Left Yellow Off LAN link is not established. On(Steady state) LAN link is established. Right Green/ Orange On(brighter & pulsing) The computer is communicating with another computer on the LAN.
MS-7672 Connectors Serial ATA Connector: SATA1~7 This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device. Chapter 2 * The MB layout in this figure is for reference only. SATA1_2 SATA3_4 SATA5_6 SATA7 SATA1~2 (6Gb/s, by Intel® Z68) SATA3~6 (3Gb/s, by Intel® Z68)) SATA7 (6Gb/s, by Marvell® 88SE9128) Important Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur during transmission.
Hardware Setup Fan Power Connectors: CPUFAN1,SYSFAN1~4 The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. d o n u /N ro 2V or .G 1 ns 1 + e . 2 .
MS-7672 Front Panel Connectors: JFP1, JFP2 These connectors are for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide. P o w e r r r E D Buz zer .+ 8 . 6 + . 4 . 2 L D D in E LE P rL d o e n .N w e d 7 .Po sp n 5 .Su rou 3 .G JFP2 1 ch it w d e tS rv e D s E se e L e R D .R D 9 .+ H 7 .5 . 3 .+ 1 JFP1 ake Front USB 3.0 Connector: JUSB4 USB 3.0 port is backward-compatible with USB 2.0 devices.
Hardware Setup Front USB 2.0 Connector: JUSB1/ JUSB2/ JUSB3 This connector, compliant with Intel® I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like. The JUSB1 (red mark) supports the MSI newly Super-Charger technology which provides fast charging function anytime for charging your Smartphone.
MS-7672 S/PDIF-Out Connector: JSP1 This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission. Chapter 2 115V d n u F ro DI .G P 1 .S CC 2 .V 3 * The MB layout in this figure is for reference only. S/PDIF-Out Bracket (optional) Chassis Intrusion Connector: JCI1 This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated.
Hardware Setup TPM Module connector: JTPM1 This connector connects to a TPM (Trusted Platform Module) module (optional). Please refer to the TPM security platform manual for more details and usages. 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .L P C 3 .LP 1 d n u nd r ro u n r e .G ro Pi we Q r ow 4 1 2 . G o P o IR w e y p 1 .N V ial o b 0 1 .5 er P nd 8 S 3V ta . 6 3.
MS-7672 Front Panel Audio Connector: JAUD1 This connector allows you to connect the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide. io Chapter 2 ct te e D e n o n h io P ct d e a e in et .H P D 0 o 1 .N IC d 8 M n . C u 6 N o . 4 Gr . 2 n L e D n o N h E R P _S ne d o a E h e NS P .H E d 9 .S ea R 7 .H IC L 5 .M IC 3 .M 1 IEEE1394 Connector: J1394_1 This connector allows you to connect the IEEE1394 device via an optional IEEE1394 bracket. 115V d n u ro V .
Hardware Setup Voltage Check Point: FV1 This voltage check point set is used to measure the current CPU core/ CPU IO/ CPU_ GFX/ DDR/ PCH voltage. VCCP CPU_GFX PCH_1P05 7 1 CPU_VTT VCC_DDR 1 VCCP 1 CPU_GFX 7 CPU_VTT voltage: measure the current CPU I/O voltage with CPU_VTT point and GND point by using a multimeter. 7 CPU_GFX voltage: measure the current CPU Integrated Graphic voltage with CPU_GFX point and GND point by using a multimeter.
MS-7672 Jumper Clear CMOS Jumper: JBAT1 1 JBAT1 1 Keep Data 1 Clear Data Important You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 12 pin position. Avoid clearing the CMOS while the system is on; it will damage the mainboard. 2-21 Chapter 2 There is a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on.
Hardware Setup Buttons This section will explain how to change your motherboard’s function through the use of following buttons. OC Genie Button: TURBO1 This button is used to auto-overclock for the system. Press this button to enable the OC Genie function when the system is in power off state, meanwhile, the button will light and lock. And then the system will automatically detect the optimum values to overclock after booting the system.
MS-7672 Slots PCIE (Peripheral Component Interconnect Express) Slot The PCIE slot supports the PCIE interface expansion card. Chapter 2 PCIE x16 Slot PCIE x1 Slot PCI (Peripheral Component Interconnect) Slot The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply with PCI specifications. 32-bit PCI Slot Important When adding or removing expansion cards, make sure that you unplug the power supply first.
Hardware Setup LED Status Indicators CPU Phase LEDs Dual BIOS LED CPU Phase LEDs These LEDs indicate the current CPU power phase mode. Follow the instructions below to read. Lights Off CPU is in 2 phase power mode. CPU is in 4 phase power mode. CPU is in 6 phase power mode. CPU is in 8 phase power mode. CPU is in 10 phase power mode. Dual BIOS LED The Dual BIOS LED indicates the BIOS status during system power on. Follow the instructions below to read. Off: Normal.
Chapter 3 BIOS Setup This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use. You may need to run the Setup program when: ■ An error message appears on the screen during the system booting up, and requests you to run SETUP. ■ You want to change the default settings for customized features.
BIOS Setup Entering Setup Power on the computer and the system will start POST (Power On Self Test) process. When the message below appears on the screen, press key to enter Setup. Press DEL to enter Setup Menu, F11 to enter Boot Menu If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On or pressing the RESET button. You may also restart the system by simultaneously pressing , , and keys.
MS-7672 Control Keyboard Mouse <↑ ↓ > Description Select Item Move the cursor Select Icon/ Field Click/ Doubleclick the left button Jumps to the Exit menu or returns to the previous from a submenu Click the right button <+> Increase the numeric value or make changes <-> Decrease the numeric value or make changes General Help CPU Specifications Enter Memory-Z Load optimized defaults Save Change and Reset Exit Sub-Menu If you find a right pointer sy
BIOS Setup The Main Menu ▶ Language After entering the Setup menu, you can see a “Language” button. Please click it and select the language, at your desire, for the BIOS setting first. ▶ Green Power Click “Green Power” icon to enter the menu. Use this menu to specify the power phase. ▶ Utilities Click “Utilities” icon to enter the menu. This menu provides the useful utility for you to live update bios and hard disk backup. ▶ Overclocking Click “Overclocking” icon to enter the menu.
MS-7672 Green Power Chapter 3 ▶ CPU Phase Control This item allows you to select the power phase mode to reach the best power saving function. ▶ Motherboard LED Control This item allows you to enable (Auto)/ disable (disabled) the motherboard phase LED. ▶ C1E Support To enable this item to read the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E). ▶ Intel C-State C-state is a power management state that significantly reduces the power of the processor during idle.
BIOS Setup ----- GreenPower Genie----▶ Icore This item shows the amperage of Core. Read only. ▶ Pout This item shows the power consumption of the system. Read only.
MS-7672 Utilities Chapter 3 ▶ Memory Test This item is used to test installed memory. ▶ Live Update Live Update is a tool used to detect and update your BIOS online so that you don’t need to search for the correct BIOS version throughout the website. ▶ HDD Backup This item is used to backup hard disk. Hard disk store backup and restore is one of the most common and important task. It consists of backing up all the partition on image files.
BIOS Setup Overclocking ▶ Current CPU / DRAM Frequency These items show the current clocks of CPU and Memory speed. Read-only. ▶ CPU Base Frequency [10KHz] This item allows you to set the CPU Base clock (in 10KHz). You may overclock the CPU by adjusting this value. Please note the overclocking behavior is not guaranteed. ▶ Adjust CPU Ratio This item controls the multiplier that is used to determine the internal clock speed of the processor relative to the external or motherboard clock speed.
MS-7672 ▶ Internal PLL Overvoltage This item are used to adjust the PLL voltage. ▶ EIST The Enhanced Intel SpeedStep technology allows you to set the performance level of the microprocessor whether the computer is running on battery or AC power. This field will appear after you installed the CPU which supports speedstep technology. ▶ DRAM Frequency This item allows you to adjust the DRAM frequency. Please note the overclocking behavior is not guaranteed.
BIOS Setup ▶ tRCD When DRAM is refreshed, both rows and columns are addressed separately. This setup item allows you to determine the timing of the transition from RAS (row address strobe) to CAS (column address strobe). The less the clock cycles, the faster the DRAM performance. ▶ tRP This setting controls the number of cycles for Row Address Strobe (RAS) to be allowed to precharge.
MS-7672 ▶ Spread Spectrum When the mainboard’s clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. • If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you are plagued by EMI, select the value of Spread Spectrum for EMI reduction.
BIOS Setup ▶ CPU Technology Support Press to enter the sub-menu. The sub-menu shows the installed CPU technologies. Read only. ▶ MEMORY-Z Press to enter the sub-menu. ▶ DIMM1~4 Memory SPD Press to enter the sub-menu. The sub-menu displays the informations of installed memory. ▶ CPU Features Press to enter the sub-menu and the following screen appears: ▶ Active Processor Cores This item allows you to select the number of active processor cores.
MS-7672 ▶ Intel Virtualization Tech This item is used to enable/disable the Intel Virtualization technology. For further information please refer to Intel’s official website. ▶ Intel VT-D Tech This item is used to enable/disable the Intel VT-D technology. For further information please refer to Intel’s official website. ▶ C1E Support To enable this item to read the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E).
BIOS Setup Games This menu provides several games for you to play. Simply click any icon to enter it and following the game rules to play it. Important Before you enter to the Game menu, please place the MSI Driver DVD that be included in the mainboard package into the DVD-ROM drive . This DVD provides the necessary programs for the game utility.
MS-7672 Settings Chapter 3 System Status ▶ System Date This allows you to set the system to the date that you want (usually the current date). The format is . day Day of the week, from Sun to Sat, determined by BIOS. Read-only. month The month from Jan. through Dec. date The date from 1 to 31 can be keyed by numeric function keys. year The year can be adjusted by users.
BIOS Setup ▶ System Time This allows you to set the system time that you want (usually the current time). The time format is . ▶ SATA Port1~6 It will show the device information that you connected to the SATA connector. Important SATA Port1~6 are available when you connect the HDD devices to the SATA connectors on the mainboard. ▶ System Information It shows the information of your system (read only). Advance ▶ PCI Subsystem Settings Press to enter the sub-menu.
MS-7672 ▶ Integrated Peripherals Press to enter the sub-menu. Chapter 3 ▶ Onboard Lan Controller1/ 2 This item allows you to enable/ disable the onboard LAN controller 1/ 2. ▶ LAN Option ROM This item is used to decide whether to invoke the Boot ROM of the onboard LAN. ▶ Onboard IEEE 1394 Controller This item allows you to enable/ disable the onboard IEEE 1394 controller. ▶ SATA Mode This item is used to specify RAID/ IDE/ AHCI mode for SATA port.
BIOS Setup ▶ USB Configuration Press to enter the sub-menu. ▶ USB Devices: It shows the type of installed USB device. ▶ Intel Onchip USB Controller This item allows you to enable/ disable the integrated lntel USB 2.0 controller. ▶ Legacy USB Support Select [Enabled] if you need to use a USB 2.0-interfaced device in the operating system. ▶ Onboard NEC USB 3.0 Controller This item allows you to enable/ disable the NEC USB 3.0 controller.
MS-7672 ▶ CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2/ 3/ 4 Speed These items show the current status of all of the monitored hardware devices/components such as CPU temperature/ system temperature and all fans’ speeds. ▶ Power Management Setup Press to enter the sub-menu. ▶ Restore after AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Power Off] Always leaves the computer in the power off state.
BIOS Setup ▶ Resume From S3 by USB Device The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. ▶ Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard These items determine whether the system will be awakened from what power saving modes when input signal of the PS/2 mouse/ keyboard is detected. M-Flash ▶ BIOS Boot Function This allows you to enable/ disable the system to boot from the BIOS file inside USB drive (FAT/ 32 format only).
MS-7672 Important When you select the Administrator Password / User Password item, a password box will appear on the screen. Type the password, and press . The password typed now will replace any previously set password from CMOS memory. You will be prompted to confirm the password. Retype the password and press . You may also press to abort the selection and not enter a password. These two items prevent an unauthorized person from changing any part of your system configuration.
BIOS Setup Boot ▶ Full Screen Logo Display This item enables this system to show the company logo on the boot-up screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. == Boot Option Priorities== ▶ Boot options You can select the boot priorities in these Boot items.
MS-7672 Save & Exit Chapter 3 ▶ Discard Changes and Exit Use this item to abandon all changes and exit setup. ▶ Save Changes and Reset Use this item to save changes and reset the system. ▶ Save Changes Use this item to save changes. ▶ Discard Changes Use this item to abandon all changes. ▶ Restore Defaults Use this item to load the optimized default values set by the BIOS vendor. == Boot Override == The installed storage devices will appear on this menu, you can select one of them be a boot device.
Appendix A Realtek Audio The Realtek audio provides 10-channel DAC that simultaneously supports 7.1 sound playback and 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels.
Realtek Audio Installing the Realtek HD Audio Driver You need to install the HD audio driver for Realtek audio codec to function properly before you can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audio operations. Follow the procedures described below to install the drivers for different operating systems. Installation for Windows® For Windows® XP, you must install Windows® XP Service Pack3 or later before installing the driver.
MS-7672 Software Configuration After installing the audio driver, the “Realtek HD Audio Manager” icon will appear at the notification area (lower right of the screen). You may double click the icon and the GUI will pop up accordingly. Appendix A double click the icon It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel. Software panel overview The following figure describes the function of the Realtek HD Audio Manager panel.
Realtek Audio ■ Device Selection Here you can select a audio output source to change the related options. The “check” sign (in orange) indicates the devices as default. ■ Volume Adjustment You can control the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar. ■ Application Enhancement The array of options will provide you a complete guidance of anticipated sound effect for both output and input device.
MS-7672 Hardware Default Setting The following diagrams are audio back panel default setting.
Realtek Audio ■ Backpanel audio jacks to 6-channel speakers diagram Fro nt Cen ■ ter ubw Rea oof r er Backpanel audio jacks to 8-channel speakers diagram Fro nt Cen ter S id A-6 &S &S eS ubw urro Rea oof er und r
Appendix B Intel RAID This appendix will assist users in configuring and enabling RAID functionality on platforms
Intel RAID Introduction The mainboard comes with the Intel RAID controller that allows you to configure SATA hard drives as RAID sets. SATA hard drives deliver blistering transfer speeds up to 3 Gb/s. Serial ATA uses long, thin cables, making it easier to connect your drive and improving the airflow inside your PC. The most outstanding features are: 1. Supports 3 Gb/s or 6 Gb/s transfers with CRC error checking. 2. Supports Hot-plug-n-play feature. 3.
MS-7672 BIOS Configuration Using the Intel Matrix Storage Manager Option ROM Creating, Deleting and Resetting RAID Volumes: The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the following message will appear for a few seconds. Important The “Device Model”, “Serial #” and “Size” in the following example might be different from your system. RAID Volumes None defined.
Intel RAID After pressing the and keys simultaneously, the following window will appear: [ [ MAIN MAIN MENU ] ] 1. 2. 3. 4. Create RAID Volume Delete RAID Volume Reset Disks to Non-RAID Recovery Volume Options 5. Exit [ DISK / VOLUME INFORMATION ] RAID Volumes : None defined. Physical Devices : Port Device Model 1 XXXX-XXXXXXXX 2 XXXX-XXXXXXXX [ ↑↓] - Select Serial # XXXXXXXXXXXXXX XXXXXXXXXXXXXX [ESC] - Exit Size Type/Status (Vol ID) XXX.XGB Non-RAID Disk XXX.
MS-7672 3. In the Disk field, press key and use key to select the disks you want to create for the RAID volume, then click key to finish selection. This field will become available according to the selected RAID level. 5. Then select the capacity of the volume in the Capacity field. The default value is the maximum volume capacity of the selected disks. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : Sync : Volume0 RAID1(Mirror) Select Disks N/A XXX.
Intel RAID 6. Go to the Create Volume field and press , the following screen appears for you to confirm if you are sure to create the RAID volume. Press to continue. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : Sync : Volume0 RAID1(Mirror) Select Disks N/A XXX.X GB N/A Create Volume WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want[ toHELP create] this volume? (Y / N) : Press ENTER to create the specified volume.
MS-7672 ■ Delete RAID Volume Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost. If your system currently boots to RAID and you delete the RAID volume in the Intel RAID Option ROM, your system will become un-bootable. Select option 2 Delete RAID Volume from the main menu screen and press key to select a RAID volume for deletion. Then press key to delete the selected RAID volume. The following screen appears.
Intel RAID ■ Reset Disks to Non-RAID Select option 3 Reset Disks to Non-RAID and press to delete the RAID volume and remove any RAID structures from the drives. The following screen appears: [ MAIN MENU 1. 2. ] 3. Reset Disks to Non-RAID Create RAID Volume 4. ] Recovery Volume Options Delete RAID Volume [ RESET RAID DATA 5. remove Exit its RAID structures Resetting RAID disk will VOLUME INFORMATION and revert [ it DISK to a / non-RAID disk.
MS-7672 ■ Recovery Volume Options Select option 4 Recovery Volume Options and press to change recovery volume mode. The following screen appears: [ RECOVERY VOLUME OPTIONS ] Enable Only Recovery Disk Enable Only Master Disk Appendix B 1. 2. [ HELP ] Enable Only Recovery Disk - enables recovery disk if available and disables master disk. Enable Only Master Disk - enables master disk if available and disables recovery disk. Actions will result in change from Continuous Update mode to On-Request.
Intel RAID Installing Driver ■ New Windows 7/ Windows Vista / Windows XP Installation The following details the installation of the drivers while installing operating system. 1. When you start installing Windows XP, you may encounter a message stating, “Setup could not determine the type of one or more mass storage devices installed in your system”. If this is the case, then you are already in the right place and are ready to supply the driver.
MS-7672 ■ Existing Windows Driver Installation 1. Insert the MSI DVD into the DVD-ROM drive. 2. The DVD will auto-run and the setup screen will appear. 3. Under the Driver tab, click on Intel RAID Drivers. 4. The drivers will be automatically installed. 2. Choose the Hardware tab, then click the Device Manager tab. 3. Click the “+” in front of the SCSI and RAID Controllers hardware type. The driver Intel(R) SATA RAID Controller should appear. B-11 Appendix B ■ Confirming Windows Driver Installation 1.
Intel RAID Degraded RAID Array A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation. Missing Hard Drive Member 1. Make sure the system is powered off. 2. Reconnect the hard drive. 3.
MS-7672 5. Exit Intel RAID Option ROM, and then reboot to Windows system. 6. When prompted to rebuild the RAID volume, click ‘Yes’. 7. The Intel(R) Storage Utility will be launched. Right-click the new hard drive and select ‘Rebuild to this Disk’. The ‘Rebuild Wizard’ will be launched which will guide you through the process of rebuilding to the new hard drive.
