Instruction Manual

2-9
MS-7751
Chapter 2
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng elds, and use the followng elds to set the
wake up events. Settng to [OS], the wake up events wll be dened by OS.
Resume By RTC Alarm
The eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
Date/ HH:MM:SS
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a specc date/hour/mnute/second speced n these elds (usng the
<+> and <-> to select the date & tme settngs).
Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIe devce.
Resume From S3 by USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These tems determne whether the system wll be awakened from what power sav
-
ng modes when nput sgnal of the PS/2 mouse/ keyboard s detected.
Boot
Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen. [En
-
abled] Shows a stll mage (logo) on the full screen at boot.
[Dsabled] Shows the POST messages at boot.
PCI ROM Prorty
Ths tem s used to specfy the PCI devce ROM prorty.
== Boot Opton Prortes==
1st~9th Boot
These tems are used to prortze the nstalled boot devces.
Hard Dsk Drve BBS Prortes/ CD/DVD ROM Drve BBS Prortes/ USB HardDsk
Drve BBS Prortes/ UEFI Boot Drve BBS Prortes
1st~8th Boot
These tems are used to prortze the nstalled Hard Dsk Drve/ CD/DVD ROM Drve/
USB HardDsk drves/ UEFI boot drves.
Save & Ext
Dscard Changes and Ext
Use ths tem to abandon all changes and ext setup.
Save Changes and Reboot
Use ths tem to save changes and reset the system.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶