Instruction Manual

2-23
MS-7751
Chapter 2
SECURITY
Admnstrator Password
Set the admnstratve password that wll be requred to enter the BIOS.
User Password
Set the user password that wll be requred to enter the operatng system.
Important
When selectng the Admnstratve / User Password tems, a password box wll appear
on the screen. Type the password then press <Enter>. The password typed now wll re-
place any prevous set password from CMOS memory. You wll be prompted to conrm
the password. You may also press <Esc> to abort the selecton.
To clear a set password, press <Enter> when you are prompted to enter a new pass-
word. A message wll conrm the password s beng dsabled. Once the password s
dsabled, you can enter the setup and OS wthout authorzaton.
U-Key
Enable or dsable USB drver devce as key. Ths requres the USB devce to be plugged
n for access to the computer..
Make U-Key at
When the “U-Key” as sets to [Enabled], ths tem s selectable. Ths tem allows you to
specfy the USB drve.
▶
▶
▶
▶