Instruction Manual
Chapter 3
3-24BIOS Setup 3-25 BIOS Setup
DRAM Switching Frequency [Auto]
DRAM VRM Over Temperature Protection [Auto]
Sets the temperature limit on DRAM VRM for over-temperature protection. The
DRAM Power Duty Control [Thermal Balance]
Selects the method of VRM control for DRAM phase.
[Thermal Balance] Control the VRM with thermal balance mode.
[Current Balance] Control the VRM with current balance mode.
PCH Vdroop Offset Control [Auto]
PCH Over Voltage Protection [Auto]
Sets the voltage limit for PCH over-voltage protection. If set to "Auto", BIOS will
may damage the system.
PCH Under Voltage Protection [Auto]
Sets the voltage limit for PCH under-voltage protection. If set to "Auto", BIOS will
damage the system.
PCH Over Current Protection [Auto]
Sets the current limit for PCH over-current protection.
[Enhanced] Extends the limitation of PCH over-current protection.
PCH Switching Frequency [Auto]
PCH VRM Over Temperature Protection [Auto]
Sets the temperature limit on PCH VRM for over-temperature protection. The PCH
SVID Communication [Auto]*
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.