User`s manual

User’s Manual MSE PSE-SW5F-ST/-SC/-SFP
MSTRONIC CO., LTD.
5
*SWITCH Indicator (the right LED of RJ-45)
LED STATUS Description
P1~P5
Link/Act
Green A network device is detected, but no
communication activity is detected.
Blinking
@43ms
This port is transmitting to, or receiving
package from another device at 100Mbps.
Blinking
@120ms
This port is transmitting to, or receiving
package from another device at 10Mbps.
Off No device is detected.
*PoE Indicator (the left LED of RJ-45)
LED STATUS Description
P1~P4
PoE
Yellow A valid Powered Device(PD) is detected
and delivering power on this port.
Off No PD is detected on this port.
*Power wiring
The PoE switch family includes 3 models, be used for 3 different ranges of input voltage as,
Current mode full range voltage (10 to 57VDC)
24V-802.3at mode 24VDC typical(12 to 36VDC)
48V-802.3at mode 48VDC typical(40 to 57VDC)
In current mode, please make sure the input current don’t over 10Aand make sure the input current
don’t over 2Amp.