en Instruction manual LE-427118MT
Instruction Manual Instruction Manual Dear customer, Table of Contents • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Welcome and safety notes Important safety instructions Installing the TV Package contents Installing the TV Installing the TV with a wall bracket Controls and connections Bottom and aside terminals Back side function keys Remote controller Replacing the batteries Connecting your devices Connecting your devices Setting up your network connection Description of ope
Instruction Manual Instruction Manual Installing the TV en Controls and Connections After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in two ways: Bottom and side terminals • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) to install the TV stand: 1. Place the TV screen-down on a clean, flat surface.
Instruction Manual Instruction Manual Remote Controller 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 1 STANDBY : Turn the TV on or off. MUTE: Press to turn ON/OFF the speaker output. 3 4 SOURCE: Input source conversion button. 7 PMODE: Press to change the current picture mode. 8 SMODE: Select the different sound mode directly.
Instruction Manual Connecting to a Wired Network To connect to a wired network: 1. Ensure you have: • An Ethernet cable long enough to reach your TV • A router or modem with an available Ethernet port • A high-speed internet connection 2. Connect your Ethernet cable to the router and to the LAN port on the left of the TV. 3. Usage of DHCP is recommended to configure the TV. Connecting to a Wireless Network To connect to a wireless network: 1.
Instruction Manual Instruction Manual Sound Menu Lock Menu Sound Menu • Press MENU button to display the main menu. Press / button to select Sound in the main menu, it will highlight the first option. 1. Press / button to select the option that you want to adjust in the SOUND menu. 2. Press / button to adjust. 3. After finishing your adjustment, Press MENU button to save and return back to the previous menu. Sound Mode • Press / button to select Sound Mode, then press OK button to enter sub-menu.
Instruction Manual When watching in DTV mode will enable the function EPG with this function you can see the programming of all digital channels that are supporting EGP. Next to that you can press the red button in your remote control to select a program to record to your PVR file system. Aspect Ratio • Press / button to select Aspect Ratio, then press OK button to enter sub-menu. • Press / button to select aspect ratio.
Instruction Manual Instruction Manual Install Internet and Apps Setup date manually en Configuration WELCOME PAGE • Press SOURCE button to set the Input Source to Smart TV. • If you want to skip this wizard, press HOME key. • If you have finished this wizard once, it will not auto-open again. Setup page Set up the correct Time Zone Press the arrow buttons / to select the icon and OK the sub-screen.
Instruction Manual Instruction Manual Media player Applications With the “Picture”, “Music” and “Video” you are able to play media files from a local storage. You can play the media from an U-disk, SD-CARD, USB. Install from U-Disk/SD card 1. Open the “File Manager” 2. Choose your U-disk or any other mass storage’s folder 3. Find your application, and select it 4. Press the install button 5.
Instruction Manual Instruction Manual System restore Watching Blu-ray 3D Content If the Smart TV mode does not start successfully, please proceed as followed: 1. Unplug your storage devices, such as: SD card, U disk, mobile HDD 2. Unplug the power supply. 3. Press the RECOVERY button, then plug in the power and turn on TV; release the RECOVERY button until you see the screen as followed. 4. Use / to choose “wipe data/factory reset”. 5. Press OK to confirm. 6.
Instruction Manual In this example, the viewers are sitting at a good distance. They are viewing the TV straight-on, close to the ideal eye line. They will experience good 3D quality. Instruction Manual en The display image does not cover the entire screen. • If you are in RGB mode (computer), ensure that H-Size and V-Position in the on-screen menu are set correctly. • If you are using TV, AV or Component with 480i input, press the WIDE button on the remote to change the screen mode.
Instruction Manual Instructions on environment protection Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or the packing will inform about methods for disposal. The materials are recyclable as mentioned in its marking.
http://mtlogic.
