Operation Manual

29
Using the handset:
1. Press Menu, « PLAY MESSAGE » is displayed, press Menu.
2. « NEW MSG » is displayed and the number of new messages, press Menu to play
new messages only or scroll Down to « ALL MSG » and press Menu to play all of
the messages. Listen into the handset earpiece to hear the message(s).
During playback:
Press Up or Down to adjust the playback volume.
Press 1 or 4 once to repeat the current message.
Press 1 or 4 twice to play the previous message.
Press 3 or 6 to play the next message.
Press Phonebook to delete the current message. “Message deleted” will be heard.
At the end of playback:
“End of messages. To delete all messages, press delete” will be heard. To delete all
messages, press Phonebook, “All messages deleted” will be heard.
10.5 Adjust the speaker volume
The base loudspeaker volume can be adjusted from low to high. Press Vol up to
increase the volume, or Vol down to decrease the volume.
10.6 Outgoing messages (OGMs)
The outgoing message is the message a caller rst hears when the answering
machine picks up their call.
The phone has two pre-recorded outgoing messages, Answer & Record or Answer
Only, these can both be personalised.
The pre-set Answer and Record outgoing message, that allows the caller to leave a
message, is “Hello, your call cannot be taken at the moment, so please leave your
message after the tone”.
10.7 Record your own OGM
Recording a personalised OGM will replace the pre-recorded or the previous
personalised OGM. However, the pre-recorded OGM can be re-instated at any time
by deleting the personalised OGM, see page 29.
Using the handset:
1. Press Menu, scroll Down to « TAM SETTINGS » and press Menu.
2. Scroll Down to « OGM SETTING » and press Menu.
3. Scroll Down to « RECORD OGM » and press Menu.
4. Press Up or Down to select either « ANS AND REC » or « ANS ONLY » and
press Menu.
5. Listen into the handset earpiece to hear “Please speak after the tone. To end
recording, press #”.