Manual
3
Thank you for choosing MT Solar Pole Mounts.
It is the installer’s responsibility to determine the foundaon parameters based on local site condions,
such as wind speed, snow load, soil type, exposure category, etc. Installaons also must comply with local
building regulaons and perming requirements.
We recommend consulng a licensed engineer to determine appropriate foundaon dimensions and pipe
size and thickness. MT Solar can also provide a stamped drawing engineered for site-specic requirements
for an addional fee. Please contact us to nd out more.
Tips for Convenonal Pipe Installaon:
Dig hole according to recommended depth and diameter.
Set pipe in hole and use a level to ensure it is plumb and vercal to the ground.
If installing mulple poles, use a string to line up pipes.
Brace pipe to prevent it from moving while pouring concrete.
Proper compacon of backll around sonotube or form is recommended, unless pouring so that con-
crete is in direct contact with the soil.
Allow concrete to cure for recommended length of me.