Manual

Thank you for choosing MT Solar Pole Mounts.

It is the installer’s responsibility to determine the foundaon parameters based on local site condions,

such as wind speed, snow load, soil type, exposure category, etc. Installaons also must comply with local

building regulaons and perming requirements.

We recommend consulng a licensed engineer to determine appropriate foundaon dimensions and pipe

size and thickness. MT Solar can also provide a stamped drawing engineered for site-specic requirements

for an addional fee. Please contact us to nd out more.

Tips for Convenonal Pipe Installaon:

 Dig hole according to recommended depth and diameter.

 Set pipe in hole and use a level to ensure it is plumb and vercal to the ground.

 If installing mulple poles, use a string to line up pipes.

 Brace pipe to prevent it from moving while pouring concrete.

 Proper compacon of backll around sonotube or form is recommended, unless pouring so that con-

crete is in direct contact with the soil.

 Allow concrete to cure for recommended length of me.