Manualshelf

Installation Guide

ManualsBrandsMTD Genuine Factory Parts ManualsOutdoor Power Equipment42 in. 3-Stage Snow Blower Attachment For Troy-Bilt Super Bronco Riding Lawn Mowers (2015 and After)
11121314151617181920
12 Section 3— ASSembly & Set-Up
Attaching the Chute Crank Assembly
Use Hardware Bag 689-00353 to attach the chute crank assembly.
NOTE: Having an assistant support and position the chute crank
assembly will aid in completing the following step.
1. Using a ⁄” wrench, secure the chute crank assembly to the
auger housing assembly with four flange lock nuts.
See Figure 3-15.
Figure 3-15
Attaching the Chute Assembly
Use Hardware Bag 689-00350 to attach the chute assembly.
NOTE: Having an assistant will aid in completing the following
step.
1. While supporting the rail assembly, carefully pivot the auger
assembly downward and position it in front of the tractor.
2. Position the chute ring on top of the auger housing’s chute
adapter as show in Figure 3-16.
NOTE: Make sure the groove found in the chute ring is
facing forward.
Figure 3-16
3. Position the chute assembly (facing forward) on the chute
ring. See Figure 3-17.
Figure 3-17