Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty OPERATOR’S MANUAL Snow Cab/Sun Shade WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. NOTE: This Operator’s Manual covers several models. Features may vary by model.
1 To The Owner Thank You Thank you for purchasing this product. It was carefully engineered to provide excellent performance when properly operated and maintained. If applicable, the power testing information used to establish the power rating of the engine equipped on this machine can be found at www.opei.org or the engine manufacturer’s web site. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine.
Important Safe Operation Practices 2 WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.
2. Children 1. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. They do not understand the dangers. Never assume that children will remain where you last saw them. a. Keep children out of the mowing area and in watchful care of a responsible adult other than the operator. b. Be alert and turn machine off if a child enters the area. c.
3 Assembly & Set-Up Contents of Carton 7 4 3 2B Hardware & Loose Pack Items 7 3 13 2A 14 5 9 10 8 1 5 6B 11 12 6A 17 Figure 3-1 Ref. Part Number Description Qty. Ref. Part Number Description Qty.
NOTE: All references to LEFT, RIGHT, FRONT, and REAR indicate the Snow Cab/Sun Shade position when sitting in the tractor seat in the operator’s position. 2. CAUTION: Do not transport the tractor on a trailer or in the bed of a truck with the snow cab or sun shade installed. If your tractor is equipped with a drain hose as shown below, the oil drain tube and clip must be removed from the frame before installing the front right support (#6A). See Figure 3-3.
8. Assemble the canopy prior to attaching it to the top of the frame. Insert the cross supports (Ref. part #3) into the side supports (Ref. part #7). Then attach the center rod (Ref. part #4) in the mouting holes located on the front and rear cross supports. Then assemble the cross support rods (Ref. part #4) with rod connectors (Ref. part #4) and place the ends into the mouting holes located on the inside of the side supports. 3. There are two straps on the rear mesh flap of the sun shade.
6. The outer front clips attach to the front fenders near the wheels. See Figure 3-14. 8. Unzip the cab door and locate the five straps inside the cab. There is one in the front (near the hood) and a four along the top. Snap the ends of each strap together and then tighten them securely. See Figure 3-16. 11. If your tractor has a snow thrower installed, the chute directional control can be positioned or routed inside the cab through the zippered opening on the left side of the cab. See Figure 3-19.
Drill Templates NOTE: Some tractors will require the use of the Snow Cab/Sun Shade Mounting Kit (#759-05086) in order to install. To order the snow cab/sun shade mounting kit see your authorized service dealer or contact Customer Support or use the paper templates to the Right. 1. Align template A on the right side of the tractor as shown in secure in place with the hex screw, nut and screw from the Snow Cab/Sun Shade Mounting Kit. See Figure 3-21. A B Figure 3-21 2.
Notes
MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States and/or its territories and possessions, and by MTD Products Limited with respect to new merchandise purchased and used in Canada and/or its territories and possessions (either entity respectively, “MTD”). b.
