Operating instructions

5.2 Parameter overview, User settings
BU 0700 GB-1411 Subject to technical alterations 103
5.2 Parameter overview, User settings
(P)  Parameter set-dependent, these parameters can be differently adjusted in 4 parameter sets.
Parameter
No.
Name
Factory
setting
Setting after commissioning
P 1
P 2
P 3
P 4
OPERATING DISPLAYS (5.1.1)
P000
Operating display
P001
Select of displayed value
0
P002
Display factor
1.00
BASIC PARAMETERS (5.1.2)
P100
Parameter set
0
P101
Copy parameter set
0
P102 (P)
Acceleration time [s]
2.0/ 3.0/ 5.0
P103 (P)
Deceleration time [s]
2.0/ 3.0/ 5.0
P104 (P)
Minimum frequency [Hz]
0.0
P105 (P)
Maximum frequency [Hz]
50.0
P106 (P)
Ramp smoothing [%]
0
P107 (P)
Brake reaction time [s]
0.00
P108 (P)
Disconnection mode
1
P109 (P)
DC brake current [%]
100
P110 (P)
Time DC-brake on
2.0
P111 (P)
P factor torque limit [%]
100
P112 (P)
Torque current limit [%]
401 (OFF)
P113 (P)
Jog frequency [Hz]
0.0
P114 (P)
Brake delay off [s]
0.00
MOTOR DATA / CHARACTERISTIC CURVE PARAMETERS (5.1.3)
P200 (P)
Motor list
0
P201 (P)
Nominal frequency [Hz]
50.0 *
P202 (P)
Nominal speed [rpm]
1385 *
P203 (P)
Nominal current [A]
3.60 *
P204 (P)
Nominal voltage [V]
400 *
P205 (P)
Nominal power [W]
1.50 *
P206 (P)
Cos phi
0.80 *
P207 (P)
Star Delta connection
0 *
P208 (P)
Stator resistance []
4.37*
P209 (P)
No load current [A]
2.1 *
P210 (P)
Static boost [%]
100
P211 (P)
Dynamic boost [%]
100
P212 (P)
Slip compensation [%]
100
P213 (P)
ISD control loop gain [%]
100
P214 (P)
Torque precontrol [%]
0
P215 (P)
Boost precontrol [%]
0
P216 (P)
Time boost precontrol [s]
0.0
P217 (P)
Oscillation damping [%]
10
P218
Modulation depth [%]
100
*) dependent on inverter power or P200