Operator's Manual 22" Rotary Mowers Model Series 500 Thru 509 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forestcovered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
TABLEOFCONTENTS Content Important Safe Operation Practices Slope Gauge Assembling Your Lawn Mower Know Your Lawn Mower Page 3 6 7 9 Operating Your Lawn Mower 9 Content Making Adjustments Maintaining Your Lawn Mower Trouble Shooting Illustrated Parts List Warranty Page 10 11 13 14 16 FINDINGMODELNUMBER This Operator's Manual is an important part of your new lawn mower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.
SECTION 1: IMPORTANT SAFEOPERATION PRACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.
18.Iftheequipment should starttovibrate abnormally, stop watchful care of a responsible adult other than the theengine andcheckimmediately forthecause. operator. 2. Be alert and turn mower off if a child enters the area. Vibration isgenerally awarning oftrouble. 19.Shuttheengine offandwaituntilthebladecemes toa 3. Before and while moving backwards, look behind and down for small children. complete stopbefore removing thegrasscatcher or unclogging thechute. Thecutting bladecontinues to 4.
GeneralService: 1. 2. 3. 4. 5. 6. 7. ,_ Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Before cleaning, repairing, or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting. Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g.
SIGHT AND HOLD THIS LEVEL WITH A VERTICAL TREE A POWER POLE A CORNER OF A BUILDING OR A FENCE POST £O o o =' wA..,.G & o. -_ .c o Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). A dding mower could overturn and cause sedous injury. If operating a walk-behind mower on such a slope, it is extremely difficult to maintain your footing and you could slip, resulting in serious injury.
SECTION3: ASSEMBLING YOURLAWNMOWER IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower. To secure the upper and lower handle, tighten the wing nuts near the top of lower handle (carriage bolts must be seated properly into the handle) .
InstallingFrontWheels Place the front of the mower deck on raised blocks. Lower the chute deflector carefully to its operating position keeping your fingers out of the way. Remove lock nut from pivot arm assembly, slide wheel onto pivot arm assembly and secure with lock nut. See Figure 6. Assemble the other side in the same manner. Raise Deflector If your mower is equipped with hub caps, place hub caps in position against the inner hub of wheel.
IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower. SECTION4: KNOWYOURLAWNMOWER Read this operator's manual and safety rules before operating your lawn mower. Compare the illustration in Figure 10 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
Yourlawnmowermaybeequippedwitha constant speedthrottle,whichis setatfullthrottleforbest performance. Standbehindthemowerandsqueeze theblade controlhandleagainsttheupperhandle. Grasprecoilstarterhandleandpullropeoutslowly untilenginereachesthestartofcompression cycle (ropewillpullslightlyharderatthispoint). Lettheroperewindslowly.Pullropewitha rapid, continuous, fullarmstroke.Keepingafirmgriponthe starterhandle,lettheropereturntothestarterslowly. in the fall as long as there is growth.
SECTION7: MAINTAINING YOURLAWNMOWER CustomerResponsibilities MAINTENANCE SCHEDULE _ °'e __ q,_ e_ _4_
Maintenance Removingthe Blade Disconnect spark plug wire from spark plug. Turn mower on its side making sure that the air filter and the carburetor are up. Remove the bolt and the blade bell support which hold the blade and the blade adapter to the engine crankshaft. See Figure 14. Remove the blade and the adapter from the crankshaft. NOTE: When tipping the unit or emptying the fuel tank keep the air cleaner side of engine up.
SECTION8: TROUBLESHOOTING Problem Engine fails to start Engine runs erratic Engine overheats Idles poorly Excessive vibration Cause 1. 2. 3. 4. Blade control handle disengaged. Spark plug wire disconnected. Fuel tank empty or stale fuel. Blocked fuel line. 1. 2. 3. 4. Engage blade control handle. Connect wire to spark plug. Fill tank with clean, fresh gasoline. Clean fuel line. 5. 6. Faulty spark plug. Engine flooded 5. 6. Clean, adjust gap, or replace.
SECTION9: PARTSLISTFORMODELSERIES500 THRU509 51t ( 3 / 6 / 13 12 / 31 \ 4q \, 29 '11t 14 tlf Equipped ,50t
ModelSeries500 thru509 Ref. No. 1. Part No. Part Description Ref. No. Part No. 25. 26. 710-1044 736-0524A 27. 738-1172 Blade Bell Support Shoulder Screw 3/8 - 16 x.302 2. 747-1161A 749-1092A 3. 746-0957 Upper Handle Blade Control Cable - B&S 37.25" 746-1130 Blade Control Cable - B&S 40" 28. 736-0741 Bell Washer,760 ID x 1.25 OD 746-0946 Blade Control Cable - Tec 48,25" 29. 734-1988 Front Wheel Assembly 7 x 1.8 4, 710-1205 Eye Bolt 31. 720-0426 Height Adjuster Knob 5.
MANUFACTURER'S LIMITED WARRANTY The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. "MTD"warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in materials or workmanship.
