User`s manual

102 cHAPTER 6: Computer Interface Operation
Model 335 Temperature Controller
3. It is recommended the default folder is not changed. Take note of this folder loca-
tion and click Next.
4. An "Extraction complete" message will be displayed. Click to clear the Show
extracted files checkbox, and click Finish.
6.3.3.3.3 Manually install the driver
Manually installing drivers differ between versions of Windows®. The following 
sections describe how to manually install the driver using Windows Vista®, Windows
7, and XP. To install the driver you must be logged into a user account that has

administrator privileges.
For Windows Vista® or Windows 7
1. Connect the USB cable from the Model 335 to the computer.
2. Turn on the Model 335.
3. If the Found New Hardware wizard appears, click Ask me again later.
4. Open Device Manager. Use this procedure to open Device Manager.
a. Click the Windows® Start button and type Device Manager in the 
Start Search box.
b. Click on the Device Manager link in the Search Results Under Programs
dialog box.
c. If User Account Control is enabled click Continue on the User Account
Control prompt.
5. Click View and ensure the Devices by Type check box is selected.
6. In the main window of Device Manager, locate Other Devices in the list of device
types. In many instances this will be between Network adapters and Ports (COM
& LPT). If the Other Devices item is not already expanded, click the + icon.
Lake
Shore Model 335 should appear indented underneath Other Devices. If it is
not displayed as Lake Shore Model 335, it might be displayed as USB Device. If
neither are displayed, click Action and then Scan for hardware changes, which
may open the Found New Hardware wizard automatically. If the Found New
Hardware wizard opens, click Cancel.
7. Right-click on Lake Shore Model 335 and click Update Driver Software.
8. Click Browse my computer for driver software.
9. Click Browse and select the location of the extracted driver.
10. Ensure the Include subfolders check box is selected and click Next.
11. When the driver finishes installing a confirmation message stating “Windows has
successfully updated your driver software” should appear. Click Close to com
-
plete the installation.
For Windows® XP
1. Connect the USB cable from the Model 335 to the computer.
2. Turn on the Model 335.
3. The Found New Hardware wizard should appear. If the Found New Hardware
wizard does not appear, the following procedure can be used to open the Hard
-
ware Update wizard which can be used instead:
a. Open Device Manager. Use this procedure to open the Device Manager:
D Right-click on My Computer and then click Properties. This will open
the System Properties dialog.
D Click the Hardware tab and then click Device Manager.
b. Click View and ensure the Devices by Type check box is selected.