User`s manual

6 . 3 . 3 In st al l i n g th e U SB D r iv e r 103
| www.lakeshore.com
c. In the main window of Device Manager, locate the Ports (COM & LPT)
device type. In many instances this will be between the Network adapt
-
ers and Processors items. If the Ports (COM & LPT) item is not already
expanded, click the + icon. Lake Shore Model 335 should appear
indented underneath Ports (COM & LPT). If it is not displayed as
Lake
Shore Model 335, it might be displayed as USB Device. If neither are
displayed, click Action and then select Scan for hardware changes,
which may open the Found New Hardware wizard automatically. If the
Found New Hardware wizard opens, continue to step 4.
d. Right-click on Lake Shore Model 335 and click Update Driver.
4. Select No, not at this time and click Next.
5. Select Search for the best driver in these locations, click to clear the Search
removable media (floppy, CD-ROM…) check box, and click the Include this loca
-
tion in the search check box.
6. Click Browse and open the location of the extracted driver.
7. Click Next.
8. When the driver finishes installing a confirmation message stating “The wizard
has finished installing the software for Lake Shore Model 335 Temperature Con
-
troller” should appear. Click Finish to complete the installation.
6.3.3.4 Installing the USB Driver from the Included CD
The Model 335 USB driver is available on the included CD. The following section
describes the process of installing the driver from the CD. To install the driver you
must be logged into a user account that has administrator privileges.
For Windows Vista® or Windows 7
1. Insert the CD into the computer.
2. Follow steps 1–9 of the Windows Vista® or Windows 7 procedure in 
section 6.3.3.3.3.
3. Click Browse and select the drive containing the included CD.
4. Ensure the Include subfolders check box is selected and click Next.
5. When the driver finishes installing a confirmation message stating “Windows has
successfully updated your driver software” should appear. Click Close to com
-
plete the installation.
For Windows® XP
1. Insert the CD into the computer.
2. Connect the USB cable from the Model 335 to the computer.
3. Turn on the Model 335.
4. When the Found New Hardware wizard appears select No, not at this time and
click Next.
5. Select Install the software automatically (recommended) and click Next.
6. The Found New Hardware wizard should automatically search the CD and install
the drivers.
7. When the Found New Hardware Wizard finishes installing the drivers a message
stating "the wizard has finished installing the software for Lake Shore Model 335
Temperature Controller" should appear. Click Finish to complete the installation.