User Guide

12A-389I013 (2001)Page 6 of 10
General Assembly
Ref # Part Number Qty Description
1 747-0824 Control Handle Ass'y (Std)
647-0004 Control Handle Ass'y (Deluxe)
2 731-1639 Baffle
3 710-0605 Oval C-Sunk Mach - Screw If Equipped
4 736-0501 Spring Washer .66" ID If Equipped
5 720-0279 Handle Knob 1/4-20 Thd.
6 646-0875 Throttle Housing If Equipped
646-0876 Throttle Housing w/choke If Equipped; (Model 378Q)
7 712-0324 Hex L-Nut 1/4-20
8 749-0439C Upper Handle
9 746-0876 Throttle Lever If Equipped
12 746-0843 Throttle Control Wire-55" If Equipped
746-0848 Throttle Control Wire-47" If Equipped
746-1115 Throttle Control Wire-47" If Equipped; (Model 378Q only)
746-0841 Throttle Control Wire-60" If Equipped
13 710-1205 Rope Guide
14 732-0700 Wire-47" Lg.
15 720-0276 Hand Knob
16 746-0554 Control Cable-40.5"
746-0555 Control Cable-55"
746-0556 Control Cable-45"
746-0557 Control Cable-47"
17 726-0240 Cable Tie
18 710-1174 Curved Hd. Bolt 5/16-18x2" Lg.
19 749-0907A Lower Handle
20 811-00185 Throttle Assy Comp (Incl. 3,4,6,7,9); If Equipped
811-00748 Throttle Assy Comp (Model 378Q)
21 710-1237 Hex Self-Tap Scr. #10-32 x .62" Lg. (B&S) If Equipped
710-0871 Hex Sems Scr. #10-32 x .3" Lg.(Tec.) If Equipped
22 735-0639 Spark Plug Boot
23 751B213146 Cable Clamp (B&S) If Equipped
7510007775 Cable Clamp (Tec.) If Equipped
24 710-1220 Screw H.L. 12-24
25 710-0351 Screw Mach. B Tapp.
27 Engine
28 731-1714A Belt Cover
29 710-0167 Scr. 1/4-20: .50 Lg.
30 710-0896 Scr.:AB 1/4-20: .625 Lg.
31 712-0287 Hex Nut: 1/4-20
32 736-0270 Bell Wash. .265 x .75 x .062
33 736-0329 Lock Wash. 1/4
35 714-0104 Int. Cotter Pin 5/15" Dia.
36 UNKNOWN
37 747-0922 Pivot Rod
38 750-1068 Shoulder Spacer
39 732-0809 Torsion Spring L.H.
40 756-0625 Roller Cable
41 782-7574 6 Sp. Cable Adj. Bracket
42 782-7575 6 Sp. Cable Mtg. Bracket
43 656-0613 Pulley Assembly
44 782-3029 Handle Brkt. Ass'y - L.H.
45 710-0653 Screw, Tap 1/4-20
46 711-1114 Pivot Shaft
47 712-0400 U-Nut
48 782-3030 Handle Brkt. Ass'y- R.H.
49 710-1348 Screw AB 1 /4-20