User Guide

13AH660F120 (1999)Page 14 of 23
Frame, Drive, Wheels, Rear
Ref # Part Number Qty Description
66 732-0384 Ext. Spring .62" O.D. x 6.12"
67 16554A Variable Speed Torque Brkt. Ass'y.
68 741-0419 Flanged Bearing
69 714-0111 Cotter Pin 3/32" Dia.
70 748-0234 Shoulder Spacer .27" Lg.
71 747-0530A Speed Control Link
72 741-0405 Truss Bearing .56 Dia. x 1.25"
73 720-0232 Shift Knob
74 756-0643 Fl-Idler Pulley 3.12" Dia.
75 656-0005 "V" Pulley (Used w/46" Deck)
656-0004 "V" Pulley (Used w/20" Wheels w/o 46" Deck)
76 736-0427 Bell-Wash. .56" I.D. x 1.125"
77 712-3035 Hex Jam Nut 5/16-18 Thd.
78 710-0539 Hex Bolt 3/8-24 x 1.75" Lg.
79 754-0370 Variable Speed Belt
80 716-0114 Snap Ring .56" Dia.
81 736-0355 Fl-Wash.
82 717-0800A Variable Speed Pulley Ass'y.
84 16354B Variable Speed Brkt. Ass'y.
85 732-0525 Comp. Spring - Clip
86 17668 Axle Support Brkt. - R.H.
17669 Axle Support Brkt. - L.H. (Not Shown)
88 725-1426 Solenoid
89 17630 Shift Lever Bracket
90 736-0414 Teflon Washer.565" I.D.
91 750-0956 Spacer 1" I.D. x 1.25" Lg.
92 711-1000 Belt Keeper 3" Lg.
93 725-1657A Safety Switch (Clutch)
94 738-0755 Shld. Bolt 3/8-24 x 3.12" Lg.
96 748-0334 transaxle Spacer (Use with 18" wheels or 46" deck)
97 736-0105 Bell-Wash. .38" I.D. x .88"
98 738-0569 Shaft .56" Dia. x 3.875" Lg.
99 736-0331 Bell-Wash. .39" I.D. x 1.12"
100 736-0256 Fl-Wash. .64" I.D. x .94"
101 714-0470 Cotter Pin 1/8" Dia. x 1.25"
102 710-0604 Hex Wash. Hd. Scr. 5/16-18 x .62"
103 734-1615A Hub Cap (Gray) (Optional)
734-1614A Hub Cap (Beige) (Optional)
734-1788A Hub Cap (Yellow) (Optional)
107 17860 Pedal Bracket
109 711-0198 Ferrule
111 710-0195 Hex Bolt 1/4-28 x .50" Lg.
112 736-0270 Bell-Wash. .265" I.D. x.75"
113 17707 Shift Lever Link Ass'y.
115 736-0140 Fl-Wash, .385" I.D. x .62"
116 741-0404 Needle Brgs. (2 Req'd.)
117 727-0425A Spring Clip (Used w/Ref. No. 103)
128 710-1238 Hex Wash. TT-Tap Scr. 5/16-18 x .75"
129 710-0726 Hex Wash. AB-Tap Scr. 5/16-18 x .75"
130 712-0265 Hex Sems Nut 5/16-18 Thd.
131 732-0750A Spring Switch