User`s manual

13
AXIS 216FD/FD-V/MFD/MFD-V - Accessing the Camera
AMC audio controls
Audio controls monitor the client computer’s speaker output. These controls are only
available when audio is enabled.
Click the Sp
eaker and Microphone buttons to switch the sound off and on for
the speaker and microphone, respectively.
Use the sliders to control the volume on the speaker and
microphone. The volume can be set between 0 and 100.
The buffer slider controls the size of the buffer for audio. A higher
level reduces audio break-up
, but may introduce a noticeable lag
in audio transmission. There are four settings - min, low, high and
max.
When using the Half-duplex
mode, this button toggles, allowing you to speak
and listen. The first icon indicat
es that you can talk and the speaker attached
to the camera will play your voice. The second indicates that you will hear
audio from the camera, but no audio is sent to any web client.
When in Simpl
ex talk mode, the icon toggles allowing you to speak, and is dimmed
when you do not want other clients to receive any audio.