User`s manual

AXIS 216FD/FD-V/MFD/MFD-V - Configuration - Video & Image settings

Configuration - Video & Image settings

This section describes how to configure the camera, and is intended for product

Administrators, who have unrestricted access to all the Setup tools; and Operators, who

have access to the settings for Video & Image, Audio, Live View Config, and Event

Configuration.

You can configure the camera by clicking Setup in the top right-hand

corner of the Live

View page. Click on this page to access the online help

that explains the setup tools.

Image

Image Appearance

Use these settings to change the image as required.

The image can be rotated, the image

resolution and compression can be adjusted, the image can be mirrored, and the white

balance can be changed.

For AXIS 216MFD only - Resolution includes widescreen 16:9, partial (which stands

for

partial scan where an image is taken from the center region of the sensor for optimal frame

rate in Motion JPEG/MPEG-4); and full speed, (which is partial scan that has been scaled

down to give full frame rate in Motion JPEG). Please see the online help for further

information on these settings.