User`s manual

AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
About this Document
This manual is intended for administrators and users of the AXIS
216FD/AXIS 216FD-V/AXIS 216MFD/AXIS 216MFD-V Network
Camera, and is applicable for software release 4.47 and later. It
includes instructions for using and managing the camera on your
network. Previous experience of networking will be of use when
using this product. Some knowledge of UNIX or Linux-based
systems may also be beneficial, for developing shell scripts and
applications. Later versions of this document will be posted to the
Axis website. See also the product’s online help, available via the
web-based interface.
Safety Notices Used In This Manual
Caution! - Indicates potential hazard that can damage the product.
Important! -
Indicates hazard that can seriously impair operation.
Do not proceed beyond any of the above notices until you have
fully understood the implications.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology in
the product described in this document. In particular, and without
limitation, these intellectual property rights may include one or
more of the patents listed at http://www.axis.com/patent.htm and
one or more additional patents or pending patent applications in the
US and other countries.
This product contains licensed third-party software. See the menu
i
tem “About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer, Inc.,
un
der the terms of Apple Public Source License 2.0 (see
http://www.opensource.apple.com/apsl/). The source code is
available at: http://developer.apple.com/darwin/projects/bonjour/
Legal Considerations
Video and audio surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local region before
using this product for surveillance purposes.
This product includes one (1) MPEG-4 decoder license. To purchase
furt
her licenses, contact your reseller.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio frequency
energy; if not installed and used in accordance with instructions,
may cause harmful interference to radio communications. There is
no guarantee against interference in particular installations.
If this equipment causes
harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to correct the interference by one or
more of the following measures: Re-orient or relocate the receiving
antenna. Increase the separation between the equipment and
receiver. Connect the equipment to an outlet on a different circuit to
the receiver. Consult your dealer or an experienced radio/TV
technician for help. Shielded (STP) network cables must be used
with this unit to ensure compliance with EMC standards.
USA - This equipment has been tested and found to comply with
the limits for a Class B computing device pursuant to Subpart B of
Part 15 of FCC rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is
likely to cause interference, in which case the user at his/her own
expense will be required to take whatever measures may be required
to correct the interference.
Canada - This Class B digital apparatus complies with Canadian
ICES-003.
Europe - This digital equipment fulfills the requirements for
radiated emission according to limit B of EN55022, and the
re
quirements for immunity according to EN55024 residential,
commercial, and light industry.
Japan - This is a class B product based on the standard of the
Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If used near a radio or television
receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
Australia - This electronic device meets the requirements of the
Radio communications (Electromagnetic Compatibility) Standard
AS/NZS CISPR22:2002.
Equipment Modifications
This equipment must be installed and used in strict accordance with the
instructions in the user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory certifications and
approvals.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of inaccuracies or omissions. Axis
Communications AB cannot be held responsible for technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this material.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft,
Firefox, Netscape Navigator, OS/2, Real, QuickTime, UNIX, Windows,
WWW are registered trademarks of the respective holders. Java and
Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other
countries. Axis Communications AB is independent of Sun Microsystems
Inc. UPnP
TM
is a certification mark of the UPnP
TM
Implementers
Corporation.
Support
Should you require technical assistance, contact your Axis reseller. If
your questions cannot be answered immediately, your reseller will
forward your queries to appropriate channels to ensure rapid response. If
you are connected to the Internet, you can:
• download user documentation and firmware updates
• find answers in FAQ database. Search by product, category, or phrases
• report problems to Axis by logging in to your private support area
• visit Axis Support at www.axis.com/techsup/
Safety Notice - Battery Replacement
The AXIS 216FD/FD-V/MFD/MFD-V uses a 3.0V CR2032 Lithium battery
as the power supply for its internal real-time clock (RTC). Under normal
conditions this battery lasts for a minimum of 5 years. Low battery
power affects the operation of the RTC, causing it to reset at every
power-up. A log message appears when the battery needs replacing.
The battery should not be replaced unless required! If the battery does
ne
ed replacing, please observe the following:
• Danger of Explosion if battery is incorrectly replaced
• Replace with same or equivalent battery, as recommended by
manuf
acturer.
Dispose of used batteries according to
the manufacturer's instructions.
RoHS
This product complies with both the European RoHS directive,
2002/95/EC, and the Chinese RoHS regulations, ACPEIP.
WEEE Directive
The European Union has enacted a Directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE Directive).
This directive is applicable in the European Union member
states.
The WEEE marking on this product (see right) or its
do
cumentation indicates that the product must not be disposed of
together with household waste. To prevent possible harm to human
health and/or the environment, the product must be disposed of in an
approved and environmentally safe recycling process. For further
information on how to dispose of this product correctly, contact the
product supplier, or the local authority responsible for waste disposal in
your area.
Business users should contact the product supplier for information on
ho
w to dispose of this product correctly. This product should not be
mixed with other commercial waste.
AXIS 216FD/FD-V/MFD/MFD-V User’s
Manual Rev 7.0
March 2008 Part number 31117
Copyright© Axis Communications AB, 2007-2008