User`s manual

32
AXIS 216FD/FD-V/MFD/MFD-V - Event Configuration
3. Set the Priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) for the event - start on Sundays
at 13.00 with a duration of 12 hours.
5. Set the When Activated... parameters, (what the camera would do at the specified
time) for example, send uploaded images to an e-mail address.
6. Click OK to save the Event in the Event Types list.
Please see the online help for descriptions of each available option.
Camera tampering
The camera tampering application generates an alarm whenever the camera is
repositioned, or when the lens is covered, sprayed, or severely defocused.
You must also create an event, see How to set
up a triggered event, on page 28, for the
camera to send an alarm.
Settings
The Minimu
m duration parameter sets the minimum tampering period, that is an alarm
will not be triggered until this period has elapsed, even if the tampering conditions are
otherwise met. This can help prevent false alarms for known conditions that affect the
image.
If the camera lens is sprayed or
covered so that the camera live view becomes dark, it will
not be possible to distinguish this situation from other situations where the same effect is
seen, such as when lighting conditions change.
When the Alar
m for dark images parameter is enabled, alarms are generated for all cases
where the lights are either dimmed or turned off, or if the lens is sprayed, covered, or
severely defocused. If not enabled, no alarm will be sent.
After you define these settings, click Save.