User`s manual

7
AXIS 216FD/FD-V/MFD/MFD-V - Product overview
Audio Out - audio output (line level), which can be connected to a public address (PA)
system or an active speaker with a built-in amplifier. A pair of headphones can also be
attached. A stereo connector must be used for the audio out.
Audio In - a 3.5
mm input for a mono microphone, or for a line-in mono signal (a stereo
signal from line-in uses the left channel).
Serial Number Label - the
serial number may be required during installation.
Control Button - press this
button to install the camera using the AXIS Internet Dynamic
DNS Service, or to restore the factory default settings, as described in Resetting to the
Factory Default Settings, on page
46.
Note:
AXIS Internet Dynamic DNS Service is free service from Axis that allows you to quickly and simply install
your camera. This requires an Internet connection with no HTTP proxy. See www.axiscam.net for more
information.
LED indicators
LED Color Description
Network Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No connection.
Status Green Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to flash
only when the camera is accessed. See the online help files for more information. Go to
Setup > System Options > LED settings
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.