Manual

SECTION 3: CALLING CUSTOMER SUPPORT
If you are having difficultyassembling this product or if you have any question regarding the controls, operation or
maintenance of this mower, please call the Customer Support Department. You can reach them by calling:
1-800-800-7310
Before you call, make sure that you have bolh your model and serial number ready. By having the model and
serial number ready, you help the Customer Support Representative give you faster service. To find your units
model and serial number, see SECTION 2: FINDING YOUR MODEL NUMBER.
SECTION 4: UNPACKING INSTRUCTIONS
REMOVE UNIT FROM CARTON
• See Figure 3,
• Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.
• Remove loose parts if included with unit (i.e., owner's manual, etc.).
• Cut along dotted lines and lay carton down flat.
• Remove packing material.
• Roll or slide unit out of carton. Check carton thoroughly for loose parts.
REMOVE MANUAL & LOOSE PARTS
Figure 3
DISCONNECT SPARK PLUG WIRE
Before setting up your lawn mower, disconnect the spark plug wire from the spark plug, and ground it against the
engine by attaching rubber boot to a bolt or metal clip to the grounding post on the engine. See Figure 4.
Spark Plug
Figure 4
5