Operator`s manual

Problem
Uneven cut
Mower will not self propel
Cause
1. Wheels not positioned correctly.
2. Dull blade.
1. Belt not installed properly.
2. Debris clogging drive operation.
3. Damaged orworn belt.
Remedy
1. Place all four wheels in same height posttion
(if equipped with individual height adjusters).
2. Sharpen or replace blade.
1. Check belt for proper pulley installation and
movement.
2. Stop engine, disconnect spark plug boot,
and clean out debris.
3. Inspectand replace belt.
SECTION 8 -- TROUBLESHOOTING 21