Manual

WARNING: - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read,
understand and follow the warnings and instructions in this manual and on the machine.
NOTE: Not all safety labels shown may apply to your chipper shredder.
SECTION2: ASSEMBLINGYOURCHIPPERSHREDDER
IMPORTANT: This unit isshipped without gasoline or oil
in the engine. Be certain to service engine with gasoline
and oil as instructed in the separate engine manual
before operating your machine.
NOTE: Reference to right or left hand side of the
chipper shredder is observed from the operating
position.
RemovingUnitFromCarton
Remove staples, break glue on top flaps, or cut
tape at carton end and peel along top flap to open
carton.
Remove loose parts if included with unit (i.e.,
operator's manual, etc.)
Cut along corners, lay carton down flat, and remove
packing material.
Roll or slide unit out of carton and check carton
thoroughly for loose parts.
LoosePartsIn Carton(seoFigerel)
Hopper Assembly
Discharge Chute
Chipper Chute (463 thru 465)
Bag (Not Shown)
Tamper Plug (If Equipped)
Safety Galsses (Not Shown)
DisconnectingSparkPlugWire
Before setting up your chipper shredder, disconnect the
spark plug wire from the spark plug and ground against
the engine.
Hopper
Assembly
Di_ harge
Chute
Chipper_
Chute
Figure 1