Technical data

UPS MTD 700 / 1000 / 1500 / 2000 / 3000
Safety Instructions
MTD Series
14
2. Safety Instructions
2.1 Introduction
The UPS is a device produced for uninterrupted power supply in accord-
ance with the technology rules and requirements.
The device and its related components, modules and parts meet individ-
ually and in their entirety the currently valid safety standards as well as
the standards of the EC Machinery Directive 2006/42/EC.
The device is safe when used properly and under consideration of the
safety requirements and instructions provided in this operating manual.
2.2 Proper Use
The UPS and its related components may only be used for purposes in
accordance with its design - for the short-term supply of electrical devic-
es (230 V AC) that do not exceed the nominal performance in its entirety.
Any other use is considered improper and can lead to personal injury or
damage to the device!
Improper use:
The device is not designed for use
– in explosive,
– dusty,
– radioactive or
– biologically or chemically contaminated atmospheres!
This is class A equipment. This equipment can cause radio interference
in residential areas. In this case, operator may be requested to pursue
appropriate measures!