Manual

Step 3. Tighten wing nuts.
HE
Step 5. Pinch lower handle against mounting
bracket with pliers,
Step 6. Move hairpin clip from outer to inner hole
on left and right handle mounting brackets,
Inner Hole _4_
Hairpin Clip
Pinch Here
Step 4. Raise complete handle assembly until it
clicks into place. Make sure not to kink the
control cables.
Handle Assembly
Step 7. Attach control cables to handle with pull
ties found on the handle.
Step 8. Squeeze the blade control handle against the upper handle and pull out the starter rope slowly.
Step 9. Thread the starter rope into the rope guide.
Blade Control Handle
•Upper Handle
Starter Rope
Look Here
8