- Zebrafish User Guide TLP 2824-Z

Operations & Options
Using the Cutter Option
980533-001 A TLP 2824-Z User Guide 35
Using the Cutter Option
Printers that have a be zel with a motorized blad e can dispense one or more forms that are then
automatically cut from the media supply. This option c uts through contin uous paper from rolls
and liner between labels. Keep the c utter dry. Never use any solutions or solvents to clean the
blade.
Use the
^MM command to activa te the cutt er and the ^LL command to set the fo rm length and
gap distance. See the ZPL II Programmer's Manual.
If the blade cuts through labels, adhesive can jam the cutter.
1. T urn OFF (O) printe r power and unplug the power a nd interface cables be fore clearing the
cutter.
2. After removing debris, plug in the power and interface cables, turn on the printer, then test
for normal operation.