- Zebrafish User Guide TLP 2824-Z

Maintenance
Replacing the Print Head
980533-001 A TLP 2824-Z User Guide 45
Replacing the TLP Print Head (Continued)
Assembly
The new print head comes with the clip and ground screw attached.
1. Detach the wire cover.
2. Detach the ribbon take-up hu b.
3. Align the print head and bracket to plug the left and right connectors into the black and
white wire bund les.
4. Attach the ground wire and secure it with the screw). Use a #2 Phillips driver to tighten it.
5. Insert the bracket pegs into the left side of the carriage.
6. Align the right side of the bracket and in sert the print head clip through the right side of
the ribbon carriage into the bracket.
7. Slip the left end of t he prin t head spring into the left side of th e ribbo n carriage ; then slide
the right e nd into th e other sid e. The an gle of th e "v" fits into the ind ent on top of th e print
head bracket.
8. Attach the ribbon take-u p hub.
9. Attach the wire cover.
10. Clean the print head with the cleaning pen.
Reload media and ribbon. Plug in the power cord. Print a status report to ensure proper
function.