Mulching Push Lawn Mower Operator's Manual

Figure 3-4

CUTTING HEIGHT

All wheels must be

placed in the same

relative position. For

rough or uneven lawns,

move the height adjust-

ment lever to a higher

position. This will stop

scalping of grass.

Setup and

Adjustment

Figure 3-5

Figure 3-6

IMPORTANT

This unit is shipped

without gasoline or

oil in the engine. Fill

up gasoline and oil

as instructed in the

accompanying engine

manual BEFORE

operating your mower.

4. Insert post on cable ties into holes provided on the

lower handle. Pull cable tie tight and trim excess. See

Figure 3-4.

Wheel Height Adjustment

5. Each wheel has a height adjustment lever to change

the cutting height of the mower.

a. Depress height adjustment lever towards the

wheel.

b. Slide lever to desired position for a change in

cutting height. See Figure 3-5.

c. Release lever toward deck.

Converting To Side Discharge

6. Your mower has been shipped as a mulcher. To

convert it to a side-discharge mower:

a. Lift the mulching plug.

b. Slide the two hooks on the side-discharge

deflector under the hinge pin on the mulching plug

assembly. Lower the mulching plug. See Figure

3-6.