Installation Guide

13
# 4 AIR SYSTEM
WITH LED LIGHT
FUNCTIONS
ON/OFF FOR AIR SYSTEM
1st Press: The blower turns on at 30% power. Use the up and down arrows to increase or
decrease the speed. Please note: 20% is the minimum. If the lights for the up & down arrows go
off, they can be reactivated by gently pressing the on/off button
2nd Press: The blower turns off.
PULSATION MODE
1st Press: Standard wave. Speed will vary gradually from minimum to maximum.
2nd Press: Standard pulse. Speed will go quickly from minimum to maximum, then repeats.
3rd Press: Blower returns to maximum speed.
4th Press: Returns to pulsation mode.
ON/OFF FOR LED LIGHTS
1st Press: Turns lights on to basic color mode, starting with white. Use the up and down arrows to
cycle light through the basic colors.
2nd Press: Slow rainbow cycle - Use up and down arrows to increase or decrease the speed of the cycle.
3rd Press: Slow aqua-blue-green cycle. Use the up and down arrows to increase or decrease the
speed of the cycle.
Press and hold light button at any time to turn light off.
SPA MODES
1st Press: Turns the Spa Mode on. There are three different pre-set Spa Modes. Energetic, Relaxing and
Deep Tissue. Use the up and down arrows to choose from the different selections. Each Spa Mode will
operate the tub functions automatically for 20 minutes. Simply sit back and enjoy!
2nd Press or press and hold for one second: Spa Mode off.
AUTOMATICALLY STOPS AFTER 20 MINUTES.
NOTE: The air blower will turn on by itself approximately 7 minutes after tub is completely drained.
See p. 19 for more information.