Installation Sheet

Installation and Operational Manual
°
Designer Collection
°
Freestanding Tubs
mtibaths.com / 4
Rough-In Chart For Freestanding Tubs
MODEL
#
MEASUREMENT
A
MEASUREMENT
B
MEASUREMENT
C
67 2.75” 8” 5.25"
68 3” 9.625” 6.625"
74 4” 9.5” 5.5"
75 3” 7.5” 4.5"
86 2.375” 9.25” 6.875"
88 4.125” 9.625” 5.5"
100 3.625” 9.625” 6"
112 3.125” 8.25” 5.125"
118 4.25” 9.75” 5.5"
136 3.5” 10.25” 6.75"
146* 4.75” 9.75” 5"
178* 4.5" 9.25" 4.75"
182 5.5" 11.5" 6"
191 6.75" 12" 5.25"
201* 5.25" 10.5" 5.25"
202* 5.25" 10.5" 5.25"
204** 1.75" 9.25" 7.5"
214 1.75" 9" 7.25"
225 6" 11.5" 5.5"
B
A
A
C
Floor
**Model 204 is a Clawfoot Tub designed for a decorative drain kit with exposed piping. MTI recommends purchase of
our exposed decorative drain kit for best fit. See important installation information at the bottom of page 3 and follow
manufacturer’s drain installation instructions for selected waste & overflow.
Standard Waste & Overflow
configuration
These tub models are designed
to conceal the overflow pipe
between the walls of the tub.**
Most of these tub models come with an access panel behind the waste and overflow for ease of installation, however
access from below tub is recommended.* A box-out in the floor is required to accommodate the drain assembly.**
MTI Recommends using clear 100% silicone sealant. Do Not use plumber’s putty.
*Sculpted Finish tub models do not have an access panel behind the waste & overflow. Installation will be more dicult
without subfloor access. See page 6 for installation instructions for tubs with and without access from below.
MODEL # MEASUREMENT
A
MEASUREMENT
B
134 15.25” 10”
Jasmine 3 Deep Soaking Bath
This tub has an offset overflow location that is specified on order. Included
cable drain is installed at the overflow. Dimensions provided are to the top
outside edge of the tub.