Owners Manual

Installation Instructions
Installation and Operational Manual
°
Designer Collection
°
Acrylic Freestanding Tubs
mtibaths.com / 10
Installation Instructions - Optional Equipment
RADIANCE®
Includes two heated zones for each Radiance® transformer box. A splitter cable is provided to easily
connect both pads to a single lead extending from the remote located transformer box.
CHROMATHERAPY
Includes two LED lights, as a standard order, however, each Chromatherapy control box will
accommodate up to 8 LED lights. Lights are factory connected to each other between the tub walls,
leaving a single cable to connect to the lead extending from the remote located light control box.
Do not attempt to disconnect or splice Radiance® or Chromatherapy cables installed on or extending
from the tub. Extensions are available through MTI’s Service Department. See page 8 for more details.
All system components must be accessible for future servicing. Test prior to completing installation.
MTI is not responsible for obtaining access for warranty service.
STEREO HO®
Includes four factory installed acoustic transducers with a 6ft. lead of speaker wire on each. To
install, connect speaker wire extending from the tub to the customer supplied home audio system or
a stereo receiver or amplifier. Owner’s mobile device or CD changer will connect to or sync with a
nearby customer supplied amplifer.
STEREO HO® with Bluetooth
Includes 2 factory installed acoustic tranducers, a ready-to-use Bluetooth amp, and on/off button.
A waterproof, floating Bluetooth Remote Control (BREMOTE) is available for purchase. Visit www.
mtibaths.com for more details.
To Install, connect speaker wires extending from the tub to the provided Bluetooth-ready amp, then
connect the keypad cable extending from the tub to the lead on the supplied amplifier.
Always store electrical equipment in a dry place away from bather.
Each Radiance® and Chromatherapy system comes with a dedicated on/off touch pad or designated
icon on the combination therapy keypad and a transformer box equipped with a 27" power cord.
When combined to operate with the air system, the transformer box will need to be located within
2ft. of the blower. See Step 3 on page 9. When added as a stand-alone system, the box will need to
be within 2 ft. of a GFCI protected outlet. See electrical specifications and, “Remote Installation of Air
Blower and System Components” on page 8 for more details.
Stereo HO and Stereo HO with Bluetooth are avaialble only on select Designer Collection Freestanding tub
models. See individual tub specification sheets for available options.