Owners Manual
Installation and Operational Manual
°
Designer Collection
°
Acrylic Freestanding Tubs
13 / mtibaths.com
Operation Instructions
Operation Instructions - Combined Therapy
Keypad style and functions may vary
according to tub model and selected
options. See product specification sheet
for details or contact MTI Baths.
ON/OFF: AIRBATH
1st Press: The blower starts. LED indicator light on.
2nd Press: The blower stops. LED indicator light o.
Press & hold to increase the blower speed. Release pressure at the desired speed.
BLOWER SPEED INCREASE
Note: The blower initially starts at 30% speed.
BLOWER SPEED DECREASE
Press & hold to decrease the blower speed. Release pressure at the desired speed.
2nd Press (Pulse): Speed will go directly to minimum and then straight back to maximum. LED
indicator light will flash.
1st Press (Wave): Speed will vary gradually from maximum to minimum. LED indciator light on.
SPA MODE AIR ONLY
3rd Press: Returns to maximum speed. LED indicator light o. Press button #3 to decrease blower
speed.
1st Press: Turns this Spa Mode on. There are three dierent full system Spa Modes with this
feature that range from Relaxing, Energetic, to Deep Tissue. Use the up and own arrows to
choose from the dierent selections. Each Spa Mode will operate tub functions automatically for
20 minutes. Simply sit back and enjoy.
2nd Press: Turns this Spa Mode o.
ON/OFF: CHROMATHERAPY
1st Press: Turns on basic color mode of bath lights, starting with white. Use up and down arrows to
move light through basic colors.
2nd Press: Turns on slow rainbow cycle. Use up and down arrows to increase or decrease speed
of cycle.
3rd Press: Slow aqua-blue-green cycle. Use up and down arrows to increase or decrease speed
of cycle.
Press & hold light button at any time to turn o Chromatherapy feature.
Please visit mtibaths.com/support/installation-operation/ for detailed operation instructions.
OPERATIONAL VIDEOS:
Note: Blower automatically stops after 20 minutes.
Sensors on the floor near the drain will activate the drying cycle approximately 7 minutes after the bath is
drained and run for 1-2 minutes. The drying cycle will activate even when the air system has not been turned
on. The blower LED blinks (on keypad only) during the drying cycle countdown. This countdown cannot be
cancelled. Any attempt to cancel this cycle only resets the countdown timer.
STANDARD DRYING CYCLE WITH WATER DETECTORS:
SPA MODE AIR & LIGHTS
Elite Airbath with Spa Mode
#4 Digital System