Owners Manual
Installation and Operational Manual
°
Designer Collection
°
Acrylic Freestanding Tubs
mtibaths.com / 14mtibaths.com / 14
Operation Instructions
ON/OFF: PRESS THE ON/OFF BUTTON LIGHT MUST BE ON FOR ANY MODE TO FUNCTION.
1st Press: White light. LED light on
(White is only available when the system is initially turned on).
2nd Press: Light off. LED light off.
MODE BUTTON:
1st Press: Aqua-Blue-Green Cycle. - First cycle 1.5 seconds between color changes; then slows to 6 seconds
between color changes.
2nd Press: Rainbow Cycle - Colors change from Aqua-Blue-Magenta-Red-Orange-Yellow-Green. First cycle 1.5
seconds between color changes; then slows to 6 seconds between color changes.
3rd Press: Pressing the Mode button a third time will stop the system on the color displayed. To change the
color, use the up & down buttons to go through each color change in small increments. (Alternatively, you
could turn the light off and start over.)
UP & DOWN
Pressing the up or down arrow will allow the lights to change through the basic colors: Aqua, Blue, Magenta,
Red, Orange, Yellow and Green.
Cycle Modes: Press & hold up or down to adjust cycle speed. Release pressure at the desired speed.
Please visit mtibaths.com/support/installation-operation/ for detailed operation instructions.
OPERATIONAL VIDEOS:
1st Press: System on. LED light on.
2nd Press: System off. LED light off.
System heats to optimal temperature within 20-60 minutes, depending upon ambient
temprature. The cooler the room temperature or tub shell, the longer it may take to
feel the affects of the shell warming feature.
The system will turn off in the event of a power surge or power failure. Must have
access to transformer box for future servicing - test prior to installing.
Independent Chromatherapy
Independent Radiance®
Stereo HO
Power, song selection, and volume are controlled by user’s mobile device and/or in home audio system or
amplifier.
Stereo HO with Bluetooth
Use the touch pad that comes standard with the system to turn on and off the provided amplifier. The mobile
device paired with the Bluetooth-ready amplifier will automatically connect. Song selection and volume are
controlled via the paired mobile device.
Bluetooth Remote Control (Optional): Optional remote control enables user to power Stereo HO on and
off, control volume, and select songs from paired mobile device via previous and next buttons on the waterproof
remote control.
If more than one device has been paired with the amplifier, the last one to connect to the system will have
priority. System will turn off automatically 15 minutes after music has stopped playing.