Owners Manual

Installation Instructions
Installation and Operational Manual
°
Designer Collection
°
Acrylic Freestanding Tubs
mtibaths.com / 4
Rough-In Chart For Freestanding Tubs
MODEL
#
MEASUREMENT
A
MEASUREMENT
B
MEASUREMENT
C
67 2.75” 8” 5.25"
68 3” 9.625” 6.625"
74 4” 9.5” 5.5"
75 3” 7.5” 4.5"
86 2.375” 9.25” 6.875"
88 4.125” 9.625” 5.5"
100 3.625” 9.625” 6"
112 3.125” 8.25” 5.125"
118 4.25” 9.75” 5.5"
134 15.25” 10.25” 5”
136 3.5” 10.25” 6.75"
145 3.75” 9.75” 6"
146* 4.75” 9.75” 5"
178* 4.5" 9.25" 4.75"
182 5.5" 11.5" 6"
191 6.75" 12" 5.25"
201* 5.25" 10.5" 5.25"
202* 5.25" 10.5" 5.25"
204** 1.75" 9.25" 7.5"
208 3.5" 9.75" 6.25"
214 1.75" 9" 7.25"
216 3" 9" 6"
225 6" 11.5" 5.5"
B
A
A
C
Floor
**Model 204 is a Clawfoot Tub designed for a decorative drain kit with exposed piping. MTI recommends
purchase of our exposed decorative drain kit for best fit. See important installation information at the bottom of
page 3 and follow manufacturer’s drain installation instructions for selected waste & overflow.
STANDARD WASTE & OVERFLOW
CONFIGURATION
These tub models are designed
to conceal the overflow pipe
between the walls of the tub.**
Most of these tub models come with an access panel behind the waste and overflow for ease of installation,
however access from below tub is recommended.* A box-out in the floor is required to accommodate the drain
assembly.**
MTI RECOMMENDS USING CLEAR 100% SILICONE SEALANT. DO NOT USE PLUMBER’S PUTTY.
*Sculpted Finish tub models do not have an access panel behind the waste & overflow. Installation will be more
difficult without subfloor access. See page 6 for installation instructions for tubs with and without access from
below.