Owners Manual

Installation Instructions
Installation and Operational Manual
°
Designer Collection
°
Acrylic Freestanding Tubs
5 / mtibaths.com
Rough-In Chart For Freestanding Tubs
With Integrated Overflow And Toe Tap Drain Kit
MODEL # MEASUREMENT
X
120 9½
143 10"
210 9¼"
232 12.25"
238 13"
239A 10”
241 12.25”
250 9”
254 9½"
255 9"
256 12”
X
Floor
Rough-In Chart For Freestanding Tubs
With Direct Tee Drain
X
Floor
Tub models with direct-tee toe tap drain kits are designed to install with tub drain aligned directly above drain
pipe. Rough-in waste pipe from center of drain to top outside edge of tub. A box-out in the floor is required to
accommodate the drain assembly.
MODEL # MEASUREMENT
X
147* 7.5"
180* 12"
251 8½"
252 15¼"
Tub models with an integrated overflow are designed to install with tub drain aligned directly above drain pipe. Rough
in waste pipe from center of drain to top outside edge of tub. These tub models require only the waste to be
installed on-site. Without access from below, box out around the drain pipe approximately 3” to allow trimming
drain pipe below grade.
These tub models are designed
to conceal the overflow pipe
between the walls of the tub.
* These tub models do not have an access panel behind the waste & overflow. The overflow assembly is pre-installed at the factory
for ease of installation with the balance of the PVC direct-tee drain kit provided for completion of drain installation.
MTI RECOMMENDS USING CLEAR 100% SILICONE SEALANT. DO NOT USE PLUMBER’S PUTTY.
MTI RECOMMENDS USING CLEAR 100% SILICONE SEALANT. DO NOT USE PLUMBER’S PUTTY.
Rubber Gasket (⁄”)
PVC Drain Fitting
(approx. 3” overall diameter”)
Waste Flange
1 ⁄” schedule 40 PVC pipe
(Inserts approximately ⁄” into PVC drain fitting)
Tub