Specifications

CSA # MTDS-
1 of 3
Designer Collection Tubs
See the Installation & Operation Manual for more details.
MTI’s Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or service@mtibaths.com
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 2-bhp pump x 2, inline heater, ozone 2-20 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 2-bhp pump x 2, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra
Whirlpool
2-bhp pump
x 2
, inline heater, heated blower,
chromatherapy
, ozone
2-20 amp
IMPORTANT ORDERING & INSTALLATION INFORMATION
ELECTRICAL COMPONENTS & SPECIFICATIONS
©2021 by MTI Baths, Inc. Modification Rights Reserved
Rev. 04 23 2021
Before ordering or installing, please consider future access to equipment.
Add proper bedding compound to fully level and support bottom of tub.
When equipped with an air bath package, pre-leveled foam base or frame system, overall
tub height is increased by approx. 2-3” and is designed to install on a flat, level subfloor.
Radiance placed on airbath floor will affect placement of air jets.
System components may extend beyond the perimeter of deck.
Please measure tub on-site before building tub decking.
Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
Suction and control locations may vary.
Before discarding tub crate, check for accessories that may be packaged inside.
All product measurements are +1/2”.
Specifications and configurations are subject to change without notice.
Measurements herein supersede all others published prior to publication date below.
Features an integral seat.
IMPORTANT:
Air baths and tubs with
a pre-leveled foam base
add 2-3" to overall tub
height.
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
GENERAL SPECIFICATIONS
Material - Acrylic
Installation - Drop-in (cannot be undermounted)
Not recommended as a tub / shower combination.
Plumbed Weight - 185 lbs / 84 kg
Soaker Weight - 120 lbs / 55 kg
Average Fill - 38 gal to above jet level
Maximum Fill - 108 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
16 ½"
51¾"
47"
"
60"
60"
51¼"
34"
10 "
1
30"
98°
2
20
"
7
8
20
"
1
8
19
"
1
8
6
"
7
8
Rendezvous 2
 # 35
60" x 60" x 20.875"
35
Numbered areas on tub deck represent possible locations
to install cleaning systems, faucets and other fixtures.
Shown with Air Massage and Ultra Whirlpool Package.

Summary of content (1 pages)