SHOWER SYSTEMS SANCTUARY SPA OWNER’S MANUAL INSTALLATION GUIDE OWNER’S MANUAL INSTALLATION GUIDE Installer: this booklet must be given to the product owner.
OWNER’S MANUAL A N D I N S TA L L AT I O N G U I D E Thank you for choosing an MTI Acrylic Shower System Product. We know it will give you many years of pleasure. The instructions in this booklet will provide you with the information you need to install, operate and care for the product. Our customer service department is available to answer any additional questions you may have pertaining to the installation or operation of your Shower System product.
! Use this unit only for its intended use as described in this manual. Do not use attachments ▲ not recommended by the manufacturer. Never drop or insert any object into any opening. ! Do not operate this unit without guard over the suction fitting. ▲ ! The water in a whirlpool should never exceed 40˚ C (104˚ F). Water temperatures between ▲ 38˚ C (100˚ F) and 40˚ C (104˚ F) are considered safe for a healthy adult. Use time should be limited to approximately 10 minutes, followed by a shower to cool down.
TA B L E O F C O N T E N T S Shower Base Installation Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Cleaning Instructions for Acrylic Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Teak Shower Tray Installation / Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Shower Enclosure Installation / Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Radiance Installation and Operation. . . . . . . . . . . . . . . . . . .
SHOWER BASE I N S TA L L AT I O N I N S T R U C T I O N S Important: Read all instructions carefully before beginning installation. Before Installing: Inspect shower base thoroughly. A. Damage from shipping or delivery must be reported to carrier immediately. Do not install damaged shower base. MTI Baths is not responsible for damage occurring during shipping and/or handling. B. Factory defect must be reported to factory before base is installed. Defects claimed after installation will exclude warranty.
SHOWER BASE CLEANING INSTRUCTIONS The cross-linked cast acrylic surface of all MTI acrylic products is among the glossiest, highest quality surfaces available. Its hard, non-porous surface prevents dirt from accumulating and resists stains better than other materials. With normal use, cast acrylic will retain its beauty with only a minimal amount of care.
SHOWER ENCLOSURE I N S TA L L AT I O N I N S T R U C T I O N S Installation for each type of enclosure may vary. Please see the instructions included with your enclosure. If you need additional information, please contact our Service Department at 800-783-8827. CARE AND CLEANING FOR SHOWER ENCLOSURES • Never use scouring powder pads or sharp instruments on metal pieces or glass panels.
RESIDENTIAL WARRANTY ACRYLIC SHOWER BASES AND SHOWER ENCLOSURES WARRANTY This warranty is effective for all MTI Baths acrylic shower bases and shower enclosures manufactured after January 1, 2006. MTI shower bases and shower enclosures are warranted to be free from defects in material and workmanship for a period of TEN YEARS from date of purchase to the original purchaser. This warranty covers defective parts only. Labor is excluded from warranty.
TEAK PRODUCTS WARRANTY Teak Shower Trays and Hidden Drain Covers; Sink Trays Teak Shower Trays, Hidden Drain Covers and Sink Trays from MTI Baths are warranted against defects in material and workmanship for a period of ten years from date of purchase. They are handcrafted of the finest teak and manufactured to MTI’s specifications. During the warranty period, if your teak shower tray becomes unusable due to any defect in workmanship, please contact the MTI service department at 800783-8827.
COMMERCIAL WARRANTY ACRYLIC SHOWER BASES AND SHOWER ENCLOSURES WARRANTY This warranty is effective for all MTI Baths acrylic shower bases and shower enclosures manufactured after January 1, 2006. MTI shower bases and shower enclosures are warranted to be free from defects in material and workmanship for a period of TWO YEARS from date of purchase to the original purchaser for commercial, rental or multi-family applications. Warranty beings on date of purchase (regardless of installation date).
TEAK PRODUCTS WARRANTY Teak Shower Trays and Hidden Drain Covers; Sink Trays Teak Shower Trays, Hidden Drain Covers and Sink Trays from MTI Baths are warranted against defects in material and workmanship for a period of two years from date of purchase. They are handcrafted of the finest teak and manufactured to MTI’s specifications. During the warranty period, if your teak shower tray becomes unusable due to any defect in workmanship, please contact the MTI service department at 800783-8827.
Manufactured by: MTI Baths, Inc. mtibaths.com 670 N. Price Road Sugar Hill, GA 30518 800 783 8827 770 271 8228 Fax 800 438 8827 © Copyright 2015 by MTI Baths, Inc. Modification Rights Reserved.
