Installation Sheet

9
Blower - remotely located
Connect to a dedicated 15amp GFCI.
Blower: 110V 8.8 amps
Check Valve - must be
mounted horizontally
(as shown) and at least
2” above rim of tub.
Rigid 1”
schedule
40 PVC
Air hose - leading to
bottom of tub
Illustration A
Illustration B
ethernet cable
Connects from blower
to remote control
receiver.
water sensor
wires
Wires lead from sensors
mounted on either side of
tub drain and connect to
blower. Allows activation
of purge cycle after tub
has drained.
remote control
receiver
Connection to blower
required for remote
control to work.
01
ethernet cable
Connects from remote
control receiver to
keypad.
keypad
Can be mounted convenient
to bather, or simply left
unattached if only the
remote control is desired.
Do not use.