Installation Sheet

13
Q. My bath's air system has been working great for years, and then suddenly just stopped working.
What should I check rst?
A. The problem is most likely the breaker or the GFCI outlet. Check your breaker box rst, and then use
a hairdryer to test the outlet where the equipment is plugged in. This should identify the problem. If both
these items check out ne, please have your serial or registration number available and contact our tech-
nical service department.
Q. The remote control for my air bath no longer functions. What can I do?
A. Barely detectable power uctuations may occasionally disrupt the remote control operation. To correct:
1. Turn off the breaker or unplug the blower, then turn it on again.
2. Within 15 seconds, simultaneously press the “plus” and “minus” buttons, hold down for four seconds,
and release. The remote is now ready for use.
3. If the synchronization is not successful, simply repeat the steps.
If the remote is still inoperable, please have your serial or registration number available and contact our
technical service department. The remote control is a non-serviceable, sealed control, so it cannot be
repaired on site.