Specification Sheet

Designer Collection Tubs
CSA # MMTC-
1 of 2
©2022 by MTI Baths, Inc. Modification Rights Reserved
IMPORTANT ORDERING & INSTALLATION INFORMATION
• Before ordering or installing, please consider future access to equipment.
• Integrated overflow with toe tap drain included. May also be specified without an
overflow (see local codes).
• Air baths require job site preparations for remote mounting the blower and
required check valve. Check valve must be installed higher than the rim of the tub.
• Waterproof remote control included. Keypad is shipped loose and may be
mounted nearby.
• Faucet valves cannot be installed on this tub model.
NOTE: Filling this tub to the maximum may require
an above average size or dedicated water heater.
Features an integrated overflow.
Rev. 01 17 2022
ELECTRICAL COMPONENTS & SPECIFICATIONS
Required Electrical Service - 110 Volt
Hydrotherapy Package Components Included GFCI
Air Massage heated blower 1-15 amp
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
See the Installation & Operation Manual for more details.
MTI’s Customer Service: Monday-Friday 8am-6pm EST
800-783-8827 or [e-mail]
• Options and accessories may be packaged inside the tub crate. Always check
packaging before discarding.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
45"
65½"
16¾"
32"
21½"
1"
19"
112˚
16"
22½"
GENERAL SPECIFICATIONS
Material - Mineral Composite
Installation - Freestanding - cannot be undermounted
Not recommended as a tub / shower combination
Soaker Weight - 160 lbs / 73 kg
Maximum Fill - 67 gal to overflow
Charlotte
 # 400
65.5" x 32" x 22.5"
400
X
Floor
Drain Rough-In
Measurement
X
16"