Product Manual

CX FLEX™ 4A PRODUCT MANUAL

MERCHANDISING

KEY ENROLLMENT

Place Authorization Card over the

RFID icon to register to system.

LED will be solid blue.

System must be disarmed

to perform this operation.

Place the User Key you want to

add over the RFID icon.

If successful  unit beeps 2 times

Repeat process for all User Keys

until they are successfully added.

To close Enrollment mode, place

the Authorization Card over the

RFID icon. Enrollment mode will

end automatically after 3 minutes

of no use. LED will then be

intermittently ashing white.

NOTE: The Type-C

terminals do not

deliver power or

transfer data to any

device.

USB-C Sensor: Insert the other end of the cable into

the device.

Plug the USB-C system end (marked with the MTI

logo) of the sensor into the CX Flex until it clicks.

Flexi-Disc Sensor: Peel the red lm from the VHB

adhesive and press rmly onto the product for 1

minute if the product surface is curved, or 30 seconds

if it is at.

System will auto-arm after 1 minute, or arm

immediately by holding an enrolled User Card over the

RFID Icon.

click