User's Manual

BDA Installation and Operating Guide

Version 1.0 16

3 Installation Procedure

3.1 Installation procedure for BDA

3.1.1

Enclosure

Figure 14 Assembling of the BDA

z Ensure that BDA, cables and connectors inside the box are properly equipped

before starting installation.

z Unscrew the ground lug from the “CHASSIS” port of BDA and insert ground wire

into the lug. Screw up the ground lug to the place as it was and connect the other

end of the ground wire to a ground bar prepared in the site.

z Ensure that AC input power is in the range of the specification (typical AC 110V:

range AC 90V ~ AC120V).

z Connect the AC power cord of the power cable to the input port on the bottom of

the BDA and check if LED on the front of the BDA.

Unit :mm

182

232