User Manual

30
CSU(Corporate Service Unit)
Required Tools and Materials
Before you install the WLAN Cable Access Point 6220, ensure that the
followings are prepared for installation work.
APU
WLAN Cable Access Point 6220 APU package does not contain an
antenna and universal antenna bracket kit. For list of antennas and
accessories, see the WLAN Cable AP 6220 manual or contact your local
Nortel networks representative.
 One or more antenna cables (N-Male to the connector on the
external antenna)
 External antennas selected by your self
 Flat blade screwdrivers
 Wire cutters
 Phillips screwdriver
 Torque wrench/driver
 Another proper tools for installation
 Heat gun with propane/Mapp torch
 Trunk & Distribution Cable Connector and Drop Cable F-
connector port
 RF cable for connecting between the APU and Testing Unit (if
needed)
 Portable CATV Spectrum Analyzer
 DVM(Digital Voltammeter)
 “Document CD” and “Software CD” that contains the APU
Configurator, online help for the Configurator, and various
documents.
 Advanced Tool: RF Testing Unit: CSU, Laptop computer with
radio card
WLAN Cable Access Point 6220 NTPM99CA Rel 1.0 Issue 1 Oct. 2004