User Manual

44
Figure 3-15
Connecting the main connector module to the connector port
MAKE SURE THAT THE POWER SOURCE IS TURNED OFF PRIOR TO CONNECTING
COAXIAL CABLE(75 ohm) TO PROTECT A TECHNICIAN FROM ELECTRICAL SHOCK
18. Slide the heat shrink tubing over the connector against the APU.
19. Shrink the tubing with a painting motion not concentrating on any
one area using a propane torch with a broad “soft” frame.
Figure 3-16
Shrink the tubing for a Water Proof
WLAN Cable Access Point 6220 NTPM99CA Rel 1.0 Issue 1 Oct. 2004