User's Manual

Frequently Asked Questions:
Why the connected node can not be managed:
 Please confirm that the mobile wifi is connected to the SSID of the device to be
managed
How to restore the router to factory settings:
 When the power is on, sting the repeater's "Reset" pinhole for 10 seconds to restore
the factory settings.
How to manage the node by using PC / laptop:
 Step 1.Connect the PC / Laptop to the mesh repeater’s Wi-Fi or LAN port via ethernet
cable.
 Step 2.Launch an Internet Browser(Chrome,Safari,etc.)and enter the repeater’s
domain name or IP Address.The default login information is available at the product
label.
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimumdistance20cmbetweentheradiator&yourbody.

FCC Warning

ThisdevicecomplieswithPart15oftheFCCRules.Operationis subject to the
followingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept
any interference received, including interference that may cause undesired
operation.

NOTE1:Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfora
ClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesigned
to provide reasonable protection against harmful interference in a residential
installation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergy
and,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmful
interference to radio communications. However, there is no guarantee that
interferencewill not occur in a particularinstallation.Ifthisequipmentdoescause
harmful interference to radio or television reception, which can be determined by