User's Manual

9.5.2 Online Firmware Upgrade Settings
This page will display your current firmware version. Click on the ąCheck for New
FirmwareĆ button for detecting the latest firmware version. If have, you can upgrade your
firmware to the latest version. Otherwise the page will prompt that the firmware is the latest
version.
Figure 9-16
9.5.3 Local Firmware Upgrade Settings
Select the Router's local firmware configure file to upgrade.
Figure 9-17
Figure 9-18
9.6 Statistics Page
This page gives you various router statistics about data sent and received through
the Internet, wired network (LAN), and wireless networks.
10.Hardware
10.1 LED Indicator
The power light is steady green: The device is on.
The 2.4G light is steady green: 2.4G Wi-Fi band available.
The 5G light is steady green: 5G Wi-Fi band available.
The USB light is steady green: U disk has been inserted.
The Internet light is steady green: WAN port has been connected with network cable.
The Internet light blinks green: WAN port has data transmission.
10.2 WPS Button
1.Press the "WPS" button on the panel to start WPS (limited time is 120 seconds),
then press the router wps function.
2.Open the WPS function on your mobile phone, Wait for the connection between
mobile phone and router.
10.3 RESET Pinhole
When the power is on, sting the router's "Reset" pinhole for 10 seconds to restore
the factory settings.
Frequently Asked Questions:
Unable to open the router's administrative interface:
Make sure the computer is "Obtain an IP address automatically".
Make sure the computer is connected when the router is wireless.
Please turn off and reopen the browser, or try a different browsers (such as Firefox
or Google).
Please try another computer.
If operations above still can not solve the problem, please restore the factory settings
and re-operation.
How to restore the router to factory settings:
When the power is on, sting the router's "Reset" pinhole for 10 seconds to restore
the factory settings.