User's Manual

MG7310 Cable Modem User Manual
25
address and launch an attack on your private LAN.
IpSec PassThrough enables a VPN device or VPN software located behind your
cable modem/router and running IpSec to communicate successfully with endpoints
on the Internet.
PPTP (Point-to-Point Tunneling Protocol) PassThrough enables a VPN device or
VPN software located behind your cable modem/router and running PPTP to
communicate successfully with endpoints on the Internet.
Remote Config Management: When enabled, navigate to http://‹CM WAN
IPAddress›:8080/ to administer your Cable Modem/Router remotely. You can find
your Cable Modem/Router's WAN IP address on the Basic Setup page.
Multicast :Allows multicast specific traffic to be passed to and from the PCs on your
LAN behind your Cable Modem/Router
UPnP: If you are running an application that requires UPnP, Enable UPnP.
Primary Network Bridged: Enable or Disable the feature Pass Through These MAC
Addresses.
5.3.2 IP Filtering
Choose Advanced Router> IP Filtering to display the following page.