User's Manual

MG7310 Cable Modem User Manual
34
Figure 27 Basic configuration
This page allows you to configure the Primary Wireless Network.
Primary Network:
Enable or Disable the primary network. Guest networks may still be operational when
the primary network is disabled.
Network Name (SSID):
Sets the Network Name (also known as SSID) of the primary network.This is a 1-32
ASCII character string.
WPA-PSK / WPA2-PSK Security Key / Password:
Motorola assigned your device a unique Security Key (or Password) at the factory.
This security key is displayed here.
If you want, you can change the security key by entering the new key here and then
clicking the Save button. Channel:
Selects the control channel for AP operation.The list of available channels depends
on the selected country as presented in.
Bandwidth:
802.11b/g channels are only 20 MHz wide, but 802.11n channels may be 40 MHz
wide. There are some backward compatibility issues with 40 MHz channels though.
These issues are more likely to be encountered in the 2.4 GHz band where legacy
(802.11b/g) devices may be operating using 20 MHz channels.
Sideband for Control Channel (40 MHz only):